$1,299.00 - $1,399.00
2x POWDER Magazine Skier's Choice Winner! (2019 & 2020) Designed as a lightweight backcountry ripper, the Seeker became so much more. For the 2020 season the Seeker evolves into an even tougher ski! At 1720 grams (weight based on the 183cm size) the Seeker is respectably light. This we found to be the the ideal weight, light enough for any expedition or traverse but with enough heft to plow through any crud one might encounter at the ski hill. This ski for many of us became the daily driver. A ski with 112mm underfoot seemed large for an everyday ski, but its outstanding torsional rigidity and rocker sidecut profile makes it carve trenches on the hardpack and bust through crud like few skis before it. Of course, skiing the Seeker in powder will make you smile wide. The Tech: Carbon is an excellent reinforcement and the Seeker has 4 layers of it. We are using Triaxial, Double bias, Biaxial and the highest strength IM7 unidirectional weaves in this ski. The carbon combines with a full kevlar laminate underfoot and a high end fiberglass called S2 glass. Our 7 layer construction with opposing weaves and composites creates a quiet at speed, playful and super strong platform that dwarfs the industry standard of 2 layers. Of course only the fastest carbon-impregnated base material is used, stone ground to perfection. The Seeker also uses a resin-infused honeycomb tip and several layers of VDS rubber to control damping and enhance durability. To top it all off and to make our product highly durable, in the sandwich of the cap construction we are using carbon nanotube resin. With billions of carbon nanotubes in the matrix our edges and cap are tougher than anything out there. Tested this past season and stock on all 2020 skis, additional IM7 uni carbon layers have been added on the tip and tail. In addition, a basalt/innegra layer, one of the toughest fabrics on the planet for impact has been added underfoot to fend off those pesky rocks. The Core: The core is the soul of the ski and the Seeker has a special one. Borrowing techniques often employed in bow manufacturing, we bring together many thin layers of grain-optimized Aspen. These are laminated tightly under the binding screws and run the full length of the ski, tip to tail. Then, high quality quarter-sawn Sitka Spruce, that could easily have gone into a guitar, is inserted to lighten the core and smooth out the ride. On top of all that, a piece of quarter-sawn White Oak is top-laminated for binding retention and power transfer to the edges. Visit Instinct's website for more info: https://instinctskis.com/skis/seeker/
Rossland and Red Mountain are definitely blessed with some of the hardest charging female shredders on the planet; this is documented. When we set out to make a ski specifically for them, we found in testing that while the most common size in men’s all-mountain/powder skis was in the 185 range, for women it was closer to 170-ish. Starting from there, we developed a design and construction that has been optimized for a lighter, shorter rider who rips. The Transcend embodies the soul and the tech of the Seeker in a ski for the small(er) but mighty! It should be noted that these are generalizations some women prefer the longer stiffer Seeker platform. Our sales also tell us that some men who prefer a slightly softer ski greatly enjoy the Transcend. The 176 transcend out sold the 176 Seeker at a rate of 10:1 for men. The Tech: Carbon is an excellent reinforcement and Transcend has 4 layers of it. IM7 unidirectional and Double Bias weaves make up the four layers of carbon in this ski. The carbon combines with a full kevlar laminate underfoot and a high end fiberglass called S2 glass. Our 7 layer construction with opposing weaves and composites creates a quiet at speed, playful and super strong platform that dwarfs the industry standard of 2 layers. Of course only the fastest carbon-impregnated base material is used, stone ground to perfection. Transcend also uses a resin-infused honeycomb tip and several layers of VDS rubber to control damping and durability. To top it all off, and to make our product highly durable, in the sandwich of the cap construction we are using carbon nanotube resin. With billions of carbon nanotubes in the matrix, our edges and cap are tougher than anything out there. Tested this past season and stock on all 2020 skis, additional IM7 uni carbon layers have been added on the tip and tail. In addition, a basalt/innegra layer, one of the toughest fabrics on the planet for impact has been added underfoot to fend off those pesky rocks. The Core: The core is the soul of the ski and the Transcend has a special one. Borrowing techniques often employed in bow manufacturing, we bring together many thin layers of grain-optimized Aspen. These are laminated tightly under the binding screws and run the full length of the ski, tip to tail. Then, high quality quarter-sawn Sitka Spruce, that could easily have gone into a guitar, is inserted to lighten the core and smooth out the ride. On top of all that, a piece of quarter-sawn White Oak is top-laminated for binding retention and power transfer to the edges. Visit Instinct's website for more info: https://instinctskis.com/skis/transcend/
Building on the success of the Manley our 193cm double rockered ski, the Original Sender is a slightly smaller version available only in 186cm. It is a go fast, slash, spin and charge into anything for those who love to butter it up. We think the Slash Family should be the most durable of the lot and we expect to see them take abuse. That is why we have built them with 3 different ballistic fibers running full length above the base: Basalt/Kevlar/Spectra. Carbon can’t be overlooked for its power transfer either so there is some under the core too and it makes up the primary laminates for the top cap combined with a thin layer of S2 Glass to dampen the ride. Do what Olaus does...Send! Visit Instinct's website for more info: https://instinctskis.com/skis/original-sender/
For skiers looking for the ultimate versatility in their setup, with uncompromising big mountain performance plus the ability to take advantage of true Pin Tech climbing functionality, the Duke PT ushers in a new era. Marker sets yet another milestone, adding to the Royal Family heritage with the introduction of this hybrid freeride binding for the 2020-21 season. The biggest highlight of this new binding is the innovative Quad-Lock Ride & Hike toe. In ride mode, it provides uncompromising downhill performance with full safety release properties up to DIN 16. Switching the binding to hiking mode is simply a matter of unlocking the upper part of the toe piece and rotating it forward. Pin binding technology is integrated into the base plate underneath the toe housing and operates in much the same way as Marker's KingPin and Alpinist models. In uphill mode, you have the option of saving 250 grams weight per foot by removing the toe housing sections and stowing them in your backpack. To switch to downhill mode, the toe housing clicks back onto the base plate. It locks back into place thanks to Auto Quad-Lock technology, just by stepping into the binding, without any extra action required by the skier. Another huge advantage, the Inter Pivot 3 heel piece is the same as that of the new Jester, giving you the security and power transmission of our top of the line Freeskiing bindings while skiing down. The Duke PT also features SOLE.ID technology, just like other products in the Royal Family. This makes the binding compatible with all boot sole types falling under the Alpine (ISO 5355), Touring (ISO 9523), or GripWalk (ISO 9523) norms. LOCK & WALK BRAKE - Including neutral walking mode and 10° climbing aid. AUTO QUAD LOCK - Toe part locks itself at 4 different points automatically when stepping into the binding. RIDE & HIKE TOE - For great Royal Family downhill performance and release function combined with pin-technology for strong uphill performance; DIN 6 – 16 Convertible toe: - Save 300g per foot for the uphill. ANTI ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. MAGNESIUM PARTS - Magnesium sole holders in the toe combined with a Magnesium heel housing provide the solid construction for the hardest charging freeride athletes. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. INTER PIVOT 3 FREERIDE HEEL - The third and newest generation completely redone: improved power transmission, energy absorption, and vertical heel elasticity combined with an improved step-in comfort. AFD GLIDING PLATE - MARKER bindings are equipped with a moveable AFD (anti-friction device) supporting a precise release almost entirely unhindered by dirt, snow, and ice! Individual adjustment of the AFD to the area of application enhance optimized functionality - from racing, for children’s bindings or on ski tours.
The X-ALP EXPLORE unlocks backcountry potential and frees the ankles of adventure tourers with a unique 3D rotating cuff. Mobility - The unique 3D rotating cuff gives lateral range motion (23° external / 12° internal) making steep traverses and technical steeps easier. Lightweight - Every gram matters when you bag three peaks on the same day, so with 1,290g on each foot you're not wasting any weight. Downhill Performance - A grilamid cuff and carbon charged rear spine for rearward support, and sensifit shell for power transmission, give you confidence for reliable, fun descents. Shell & Cuff - Bootboard injected PU - Contagrip rubber sole
Shadow is the ski boot designed by La Sportiva for free-ride ski mountaineering and for ski mountaineers who love skiing on powder. It combines the power, resistance and precision comparable to a ski boot for downhill skiing, with the lightness and mobility of a ski boot for the new generation skialper.
If you're a free rider who loves to charge up the hill in lightweight comfort but wants to rip back down that untouched face with power and precision of an alpine downhill boot - then the Synchro is right up your alley. Easy on the uphill The Synchro's shell is built with Grilamid to provide strength to the boot without adding weight. Reinforced with carbon, it's LA Sportiva's stiffest ever boot, rocking up at 125 flex-index. Switch your boot into walk mode to open up its 50-degree range of motion, La Sportiva's Double Power Tongue offers great flexibility from stride to stride. If you're out of the binding and need to clamber over ice and rocks - fear not, the Synchro has a Vibram sole to provide awesome traction across uneven surfaces. Powerful downhill performance Tune the downhill performance of the Synchro with the choice of 12, 14 and 16-degree forward lean options. By closing the 4 easy-grip Pegasus Plus Buckles to wrap the two-layer double tongue around your lower leg, the boot performs exceptionally in delivering your power to the ski. Inside, you've got an Overwrap Ultralon liner that offers warmth and comfort for downhill skiing. If you're looking for super-stiff downhill performance from your AT boots - then you've come to the right place. THE BEST BITS... Solid 125-flex Wide 50-degree range of motion in walk mode Innovative dual tongue for easy walking and aggressive forward flex Wider 102.5mm last Stable Vibram boot sole AT binding compatibility 4 Oversized micro-adjustable buckles Warm, comfortable Ultralon Liner Multiple-degree forward lean spoiler Not sure about which ski boots to choose? Check out our Ski Boot Buying Guide for a full rundown.
The SCOTT Cosmos III blends lightweight agility with skiing performance for the demanding conditions of high-mountain ski-touring. POWERLITE technology gives the skier easy mobility of the cuff for climbing and solid support for turns. The Rear Hook Walk System is simple, strong, and dependable, delivering powerful energy transfer for skiing with a high range of walking mobility. Composition POWERLITE Grilamid® Bi-material tongue for proof and mobility Flex Index: 115 Last width: 103.5mm Forward lean: 11.5° + free for walking Cuff Rotation: 60° Liner: PWR Lite High Closure: 4 Ergal® Micro Adjustable Buckles + Dynamic Power Strap Features POWERLITE Tongue Rear Hook Ski/Walk Mechanism Full-length Vibram® bi-density rubber Shock Damper Inserts Lock Catches Adjustable Spoiler System ISO Touring (UNI) Dynafit® certified tech inserts Size 25-31.5 Approx. weight 1425g (size 26.5)
$849.95 $850.00 On Sale
Like the Cosmos III, the SCOTT Celeste III blends lightweight performance and agility, in a boot that has been specifically designed for women’s feet. The Rear Hook Walk System is simple, strong, and dependable, delivering powerful energy transfer for the descent and a high range of mobility for walking. Composition POWERLITE Grilamid® Bi-material tongue for proof and mobility Flex Index: 110 Last width: 103.5mm Forward lean: 11.5° + free for walking Cuff Rotation: 60° Liner: PWR Lite High Closure: 4 Ergal® Micro Adjustable Buckles + Dynamic Power Strap Features POWERLITE Tongue Rear Hook Ski/Walk System Full-length Vibram® bi-density rubber Shock Damper Inserts Lock Catches Women's Fit System: ISO Touring (UNI) Dynafit® certified tech inserts Size: 23-27.5
Less weight on your feet means more energy in the tank for getting the goods. Flexible tongue and a full 60-degree range of motion provide comfort for walking and technical climbing. Nylon polymer Grilamid exoskeleton shell is lightweight and a little stiffer than previous model – ideal for touring. Shell has a compact lower made of ultra-lightweight nylon polymer Grilamid. Dual axis cuff has a Pebax dual-density 2-buckle climbing system for lateral control and increased ankle articulation. Removable polyurethane ultra-lightweight insulating inner sole. Inner boot is thermo-mouldable EZ Thermo liner wth Spantik lacing system for custom fit. Rear diffuser element allows for full 60-degree range of motion (30 degrees forward and 30 degrees back with buckles closed). Removable 2-position asymmetric rear spoiler provides fine-tuning of forward lean angle and foot position. EZ flex Grilamid tongue uses a hinge system for better ankle movement and a waterproof seal under the tongue. Bellows at base of tongue provide comfort and flexibility in walk mode. Tongue position is adjustable among 3 positions within a 4mm range, for greater comfort. 4BT Tech last is neutral and is 102.5mm wide underfoot for a wider, more comfortable performance fit. Canting adjustment adjusts leg angle +2/-2 degrees to provide powerful neutral stance Bindings compatible with this boots are Tech, Alpine touring and TR2. Flex Index: 115 for high performance skiing on wide skis. Walk/ski mechanism is easy to operate, even with gloves on. Resolable outsole features hard yellow Vibram Top 85 edging platforms in toe and heel for climbing with softer and stickier Vibram Icetrek rubber in the midfoot and heel for grip on cold, icy or snowy surfaces. Speed step-in locator on sole allows fast positioning into bindings.
The VJJ come back is real! Enter the no gravity zone with the new ARW 116 VJJ. Featuring EST Freeride Rocker and our Poplar-Ash wood core for increased response slashing pillows or ditching trees. The added Smear Tech, 3D beveling on the tips & tails of the base, allows for limitless directions of floating off through pow, no matter the terrain. - AR75 Sidewall - Poplar Ash Core - AR Freestyle Rocker - S7 Base - Smear Tech - 2.2 Impact Edge
K2’s all-new Pinnacle Pro is our gift to freeriders needing a lighter boot with the power of the Pinnacle 130. We’ve streamlined its lightweight, eco-friendly, and temperature-stable Pebax® shell and integrated tech fittings into the shell injection, making the Pinnacle Pro compatible with both alpine and tech bindings. The K2 Pinnacle Pro was designed to climb quicker and barrel back down like a backcountry boss.
These all-mountain boots will underwrite your quest for touring fit and performance. They hike up like light touring boots and ski down like nimble downhill chargers. With 63-degrees of motion, they feel easy and natural on a long hike up. Thermoformable liners tune the fit with precision, and the thin shell walls keep them light enough to encourage you to put the skins back on and go up for another lap.
Charge in powder with Twin Rocker agility enabling more drift and float in the deepest powder. For freeride Excel in all playgrounds
$749.99 $750.00 On Sale
Introducing the Full Tilt Ascendant Approach, the best-selling Full Tilt Ascendant has grown into a family. We took the innovative tech-compatible design of the Full Tilt Ascendant and added in a Pro Tour Tongue Intuition Liner, a lightweight Grilamid Shell, and heavy-duty Michelin Grip Walk outsoles for maximum grip in any terrain. Lightweight on the uphill, without sacrificing performance on the down, this is the Ascendant Approach.
Sammy Carlson's pro model boot, the Full Tilt Ascendant SC is the tech-compatible boot that won't sacrifice performance on the downhill. A comfortable Pro Tour Wrap Liner, removable 120 Flex Tongue, and lightweight Evolution 3-Piece Shell work together to make the Ascendant SC progressive and innovative within the resort ropes and well-beyond.
$525.00 - $700.00 $700.00 Up to 25% Off
From the pow to the park and everywhere in between, the Reckoner 102 delivers thanks to its heavy freestyle influence. Featuring the same tech as its bigger brothers but with a more nimble waist width, this playful twin-tip is at home whipping cork threes off cat tracks, pivoting through tight east coast trees, or hunting for side hits on the groomers. Wherever you decide to take it, the Reckoner 102 has got your back.
The new S/LAB SHIFT MNC 13 binding ushers in the next generation of freeride capability, blending the touring efficiency of a pin (low-tech) binding, with the performance of an alpine freeride binding. For skiers who like to push the boundaries of the mountain and their skiing, SHIFT to the first ever truly compromise-free binding. Downhill performance Shift's long toe-wings absorb maximum shock, with 47mm of elastic travel, while delivering improved energy transfer and efficiency. Touring capability SHIFT offers a PIN toe design and full heel rotation for efficient touring. A convenient switch between ski and tour modes make it easy to get to untracked lines. Lightweight Made with a new material, Carbon-infused PA, combined with aluminum and steel, S/LAB SHIFT MNC 13 is light yet strong, at 1.7kg / pair. - Adjustment range: 30 mm - Adjustment range: 3.75 US sizes - Din Scale: 6-13 - Height: 30 - Skier weight: 66-125 kg - Skier weight: 145-275 lbs - Weight: 885 in g / 1/2 pair - Franchise: SHIFT - Norm: MNC - Techno: MNC - Multi Norm Certified
X PRO 130 represents the pinnacle of all mountain performance, featuring a strong, secure World Cup claw power strap and polyamide chassis for maximum transmission and power.
The all-new Armada Shift MNC 10 bridges the gap between low tech pin bindings and traditional alpine bindings. It offers skiers the efficient performance of a pin binding when touring uphill and the safety of a traditional alpine binding when descending. Specs - DIN Range: 4 – 10 - Brake Width: SH90 / SH100 /SH110 / SH120 - Screw Length: Senior Norm Tech Features - Walk to Ride Compatible (WTR) - Toe Height Adjustment - Low Profile Chassis - Oversized Platform - Hike and Ride Switch - Crampon Compatible - Freeski Brakes - Compatible with ISO 5355 alpine boots - Compatible with boots equipped with WTR pads or with Gripwalk pads
Absolutely uncompromising. You will be able to rip the downhill just like you do in a resort, with the uphill efficiency of a pin binding while having the solid downhill insurance of an alpine binding. Downhill performance - The S/LAB SHIFT MNC 10 is the ultimate downhill and uphill tool for skiers looking to conquer the entire mountain. Touring capability - PIN toe design enable full heel rotation for efficient touring and kick turning while the convenient step-in switch between ski and tour modes to access to untracked lines. Lightweight - Made with a revolutionary new material, Carbon-infused PA, the S/LAB SHIFT MNC 10 is light yet strong weighing in at 1.750kg / pair. - +Elastic travel The ultimate elastic travel on the wings. It holds the boot back when faced with bigger shocks and minimizes the risk of pre-release. - MNC (Multi Norm Certified) The certification guaranteeing equal performance and safety level no matter the boot norm. TUV - Binding tested and certified by the TUV safety monitoring agency, the reference entity for safety certification. XL Wings - Long wings that envelop the tip of the boot perfectly in order to provide increased power transmission and confidence in freeride bindings. Easy climbing aids manipulation - Ensures easy switch with the poles between climbing aid positions. Crampon system - Possibility to attach dedicated crampons to the binding. Aluminum - A rigid and strong construction that allows enhanced power transmission. Carbon-infused PA - A very lightweight and resistant alloy developed specifically for the needs of the Shift binding construction.
$640.00 $849.00 25% Off
QST 118 is the widest ski in the range, with full twin rocker to help you float in the deepest powder. You can also charge with confidence with the C/FX 3 layer, a unique reinforcement that delivers all the power of metal at a fraction of the weight. Power and stability in powder and mixed snow - A new C/FX 3 reinforcement layer integrates carbon and flax in longitudinal and transversal directions to increase the torsional strength. C/FX 3 delivers power and stability like metal, at a fraction of the weight. Energy and response - 360° Full sandwich, ABS sidewall construction delivers increased ski-to-snow contact, added strength and great terrain adaptation. Great terrain adaptation - Spaceframe is made out of an Inverted 3D Woodcore inserted with Carbon Flax and Power Transfer Platform. It provides superior ski-to-snow contact off piste and on piste, guaranteeing underfoot performance for hard pack carving.
Want it all from your ski boots, from inbounds sends to tech binding compatibility in the backcountry? The K2 Minaret 100 Ski Boots have you covered. From their alpine DIN, tech fitting equipped sole to the Synchro Interlock walk mode, these boots will be there for you whether it's a brilliant resort day or you're heading out the backcountry gate, perhaps both in the same day... Equipped with an average width last and 100 flex, the K2 Minaret 100 Ski Boots will suit most aggressive skiers exceptionally well once heat-molded. Product Details Fit: Last: 100 mm – Perfect for most average width, average instep height feet. Custom Thermo Shell – The shell can be heat molded, punched, ground and customized with your favorite boot fitter for optimized comfort and performance. The shell can be widened up to 6 mm with this process. Asymmetrical Toe Box – K2 matches the toe box to the natural curvature of your toes for a more precise and comfortable fit. Navicular Punch – A bump is pre-formed in the navicular area of the medial ankle where many skiers experience pressure. Flex: Flex: 100 – A stiff flex most suitable for advanced to expert skiers. Liner: LuxFit Tour Light Liner – This heat-moldable liner combines the performance and fit of a traditional PVC liner with the benefits of strategically placed Ultralon EVA foam. Lasted for precise "out-of-the-box" fit the LuxFit Tour also includes heat-moldable Asymmetric Tongues to reduce shin bang and ensure smooth, precise flex initiation. The Power Wedge and Power Collar offer varied forward lean and the upper cuff support needed for taking advantage of challenging conditions. Tour Flex Notches – Natural flex and optimized range of motion when in walk mode. Moldable Asymmetric Tongue Power Collar Power Wedge Shell Materials & Design PowerFuse SpYne – A rear co-injected “Y” shaped design that adds strength and power to the Energy Interlock, the PowerFuse SpYne maximizes fore/aft flex efficiency and lateral stiffness for sustained performance and responsiveness in all terrain. Because of the SpYne, K2 is able to optimize materials in the cuff and shell, eliminating excessive vibrations in rough terrain. Stance: Cuff Alignment – Dual +/- 1 degree. Forward Lean – 14° / 12° with Power Wedge Ski/Walk Mode Synchro Interlock™ – Built on the Energy Interlock design platform, the Synchro Interlock enables the simulatenous release of both an internal V-notch wedge and the Energy Interlock. When disengaged, the upper cuff is unlocked from the lower shell for fore and aft mobility by removing the wedge and opening the v-notch in the shell which increases the forward flex for more efficient movement. When engaged, the Synchro Interlock™ creates an all-mountain boot, with 100% of the flex index and uncompromised downhill performance. Buckles: 4 Aluminum Micro-Adjustable Lightweight Buckles Power Strap 40mm Velcro Powerstrap Sole: Dual Material Replaceable ISO 5355 Outsoles with Padded Mid-Grip Integrated Tech Fittings – Fully integrated into the shell injection instead of just the outsole pads. This makes these outsoles compatible with both alpine and tech bindings. Vibram® Rockered Outsoles Available Separately – Vibram® ISO 9523 rubber touring sole upgrade available for added grip, traction and security when climbing or hiking more technical terrain.
Garmont Hydra randonee ski boots for women are tuned to take on lightweight backcountry tours, yet are burly enough to drive big skis in tough terrain Details: Tech components in front and back give the boots Dynafit-style binding compatibility; Garmont Hydra boots are also compatible with step-in style randonee bindings Power Wrap anatomic shells are constructed around the shape of the foot and have been prepunched to accommodate common irregularities of skiers' feet Multi-injected lower shells have a flex that is tuned for touring; multi-injected cuffs give a close, responsive fit for leverage while carving turns High overlap design disperses pressure evenly and creates a progressive forward flex; flex inserts allow front panel to move with you for easy walking Lace-up, custom-moldable liners feature 4 different foam thicknesses and densities throughout to provide the best possible comfort and support Strobel-stitch design in the liners allows feet to sit flat for good anchoring within the liners; design also maximizes forefoot width T-Bar Pebax® tongue reinforcement on the liners enhances shin protection and helps you power forward into turns; pull loops on the front and rear ease entry and exit 3 Wide-Open buckles and catches on each boot close easily and securely; buckles swing completely open for unrestricted touring while still being held in place by the catches Wide rip-and-stick power straps wrap securely around the outside of the cuffs, distributing pressure and bringing the cuffs as close as possible your lower legs Rear walk/ski mechanisms are simple and secure; flip the levers to the ski position for a locked-down forward lean position at 25° The Garmont Hydra randonee boots have grippy, self-cleaning lugged soles that provide traction on rock and snow
Twinframe technology ensures that X Max 110 W delivers superior transmission and power, with customized comfort for all day skiing. Women's specific fit and customizable shell in the calf area for supreme comfortShell Material: bi-material polyurethane
A perennial top-seller in the men's expert level alpine boot category, the Salomon X Max 120 Ski Boots have made their way to the women's side of the boot aisle for the first time, catering to the fastest, baddest ladies out there. Those with a narrow foot may find the fit perfect straight out of the box, and for the rest of us there's the 360° Custom Shell heat molding option, which custom shapes the shell and liner while you wait. The 120 flex is the absolute top end for non-plug expert level skiers who who want the absolute best in responsiveness and power.
$565.00 $750.00 25% Off
K2’s widest female specific ski is designed from the ground up to meet the demands of the K2 Alliance. The 115C combines the stability, float, and confidence worthy of the vanguard of women’s freeride. - Torsion Control Design - Carbon Spectral Braid - SlantWall
$559.96 $699.95 20% Off
Garmont Luster Alpine Touring Ski Boots - Women's: The entire mountain is there for your domination this season with the aid of the Garmont Luster Alpine Touring Ski Boots. Whether it’s climbing for the descent, classic alpine hut trips or go-fast racing and touring, the Garmont Luster Alpine Touring Ski Boots are built for high performance in each and every aspect of ski mountaineering. Using ground-breaking a.d.d Wrap design the Garmont Luster Alpine Touring Ski Boots are setting the new standard – the only thing that is certain in the high mountains is unpredictability and the only way to be prepared is with the Garmont Luster Alpine Touring Ski Boots. Liners The Garmont Luster features the Rapid Thermo Women’s Liner with 4 foam densities for specific comfort and support, a low-profile lacing system and extra reinforcement around the cuff for comfort and performance. Additional Features The Garmont Luster is equipped with the VELCRO® Brand Fastener Power Strap for secure, broad, powerful pressure distribution and 4 wide open buckles that allow for easier, unrestricted touring. Materials The Luster’s responsive multi-injected lower shell and cuff are built from Pebax® for the lightest weight and least temperature sensitivity. The construction of the Luster uses a high overlap flex insert to give greater walking freedom and which doubles as a handle for very easy entry. A soft-silicone-like water-seal gasket between the shells’ overlap seals out snow and moisture. Flex and Fit The flex rating of the Garmont Luster Alpine Touring Ski Boots is 120 AT so when not in walk mode the Luster boots are stiff and responsive. The Garmont Luster Alpine Touring Ski Boots are high performance boots for the expert skier. Cuff Shape The Garmont Luster Alpine Touring Ski Boots have a forward lean of 25 degrees to give you the most control possible and are free for walking. The shell features a.d.d. Wrap overlap design making the Garmont Luster built for lightning fast response and comfort.
$549.99 $550.00 On Sale
From Maggie Voisin topping X Games Podiums to Taylor Lundquist taking on the Streets to Perinne Laffont topping podiums in Mogul World Cups the world over, the Full Tilt Soul Sister 100 is for women who rip. An engaging Soul Shell works together with a Pro Intuition Wrap Liner, 8 / 100 Flex Tongue, and Grip Walk Outsoles to make this one hard-charging women's ski boot. Designed to accommodate a women's calf and eliminate dead space, you'll be skiing all over the mountain with ease in the Soul Sister 100.
The Salomon QST Pro 100 Ski Boots give you all the options an all-mountain maven could ask for. Salomon's famed 100 mm last, patterned off the best-selling X Pro, fits a wide variety of foot shapes with no modification and can be adjusted with the Custom Shell heat molding process to fit many more. Product Details Fit: Last: 100 mm – An average last for most normal width and volume feet or slightly wider. 360° Custom Shell – Salomon's proven heat customization process lets you dial in the fit perfectly. Flex: 100 – A medium flex for average intermediate to advanced skiers. Liner: My CustomFit 3D Liner – Superior heel hold and new anti-packing foam. Shell Materials & Design: Twinframe2 Design – Delivers improved rebound and dynamic flex, while oversized pivot provides efficient transmission. Salomon dials in just the right amount of rigidity where it's needed for performance and leaves the shell softer in other areas to enhance comfort and ease of entry. Endofit Tongue – Thanks to a revolutionary inside overlap tongue construction, the forefoot areas are perfectly wrapped when closing the 2 front buckles. Sensifit Shell – Strong and light shell design built with thinner walls to reduce weight, reinforced in strategic areas with ribs to avoid blowing out the shell when flexing forward on hard turns. Shell – Polyurethane Cuff – Mono-Material Polypropylene Stance: 24mm Oversized Pivot – Reduced play for extreme precision and direct power transmission. Because many modern all mountain skis are wider, they require more torque to stay on edge. Oversized Pivot answers the need of wider skis. Ski/Walk Mode: Surelock Ski / Walk Mechanism – Low profile lever is located at the same level as the upper buckle and can be undone in the same movement. Maximum cuff release for touring and secure lock for skiing down. Horizontal positioning for mechanical reliability. Independent from the cuff buckle for more convenience when touring. Motion Flex – 40° range of motion for walking, with secure lock for skiing performance. Buckles: 3 Lightweight Aluminum Micro-Adjust Buckles Power Strap: 35mm Velcro Power Strap Sole: ISO 9523 Touring Sole Blocks + Dynafit Certified Tech Fittings Mounted ISO 5355 Alpine Sole Blocks Included – Alpine DIN pads are included in the box to enable alpine binding compatibility. Specs: Ability Level: Intermediate-Advanced More Ski Boot Flex: Medium Forefoot Width: 100 mm Liner Type: Semi-Custom Flex Index: 100 Boot Sole Type: Alpine Touring (ISO 9523), Tech Alpine Touring Mode: Yes Includes Tech Fittings: Yes Number of Buckles: 3 Warranty: 2 Years
Page 1 of 3 Next page