Ski

2x POWDER Magazine Skier's Choice Winner! (2019 & 2020) Designed as a lightweight backcountry ripper, the Seeker became so much more. For the 2020 season the Seeker evolves into an even tougher ski! At 1720 grams (weight based on the 183cm size) the Seeker is respectably light. This we found to be the the ideal weight, light enough for any expedition or traverse but with enough heft to plow through any crud one might encounter at the ski hill. This ski for many of us became the daily driver. A ski with 112mm underfoot seemed large for an everyday ski, but its outstanding torsional rigidity and rocker sidecut profile makes it carve trenches on the hardpack and bust through crud like few skis before it. Of course, skiing the Seeker in powder will make you smile wide. The Tech: Carbon is an excellent reinforcement and the Seeker has 4 layers of it. We are using Triaxial, Double bias, Biaxial and the highest strength IM7 unidirectional weaves in this ski. The carbon combines with a full kevlar laminate underfoot and a high end fiberglass called S2 glass. Our 7 layer construction with opposing weaves and composites creates a quiet at speed, playful and super strong platform that dwarfs the industry standard of 2 layers. Of course only the fastest carbon-impregnated base material is used, stone ground to perfection. The Seeker also uses a resin-infused honeycomb tip and several layers of VDS rubber to control damping and enhance durability. To top it all off and to make our product highly durable, in the sandwich of the cap construction we are using carbon nanotube resin. With billions of carbon nanotubes in the matrix our edges and cap are tougher than anything out there. Tested this past season and stock on all 2020 skis, additional IM7 uni carbon layers have been added on the tip and tail. In addition, a basalt/innegra layer, one of the toughest fabrics on the planet for impact has been added underfoot to fend off those pesky rocks. The Core: The core is the soul of the ski and the Seeker has a special one. Borrowing techniques often employed in bow manufacturing, we bring together many thin layers of grain-optimized Aspen. These are laminated tightly under the binding screws and run the full length of the ski, tip to tail. Then, high quality quarter-sawn Sitka Spruce, that could easily have gone into a guitar, is inserted to lighten the core and smooth out the ride. On top of all that, a piece of quarter-sawn White Oak is top-laminated for binding retention and power transfer to the edges. Visit Instinct's website for more info: https://instinctskis.com/skis/seeker/

Rossland and Red Mountain are definitely blessed with some of the hardest charging female shredders on the planet; this is documented. When we set out to make a ski specifically for them, we found in testing that while the most common size in men’s all-mountain/powder skis was in the 185 range, for women it was closer to 170-ish. Starting from there, we developed a design and construction that has been optimized for a lighter, shorter rider who rips. The Transcend embodies the soul and the tech of the Seeker in a ski for the small(er) but mighty! It should be noted that these are generalizations some women prefer the longer stiffer Seeker platform. Our sales also tell us that some men who prefer a slightly softer ski greatly enjoy the Transcend. The 176 transcend out sold the 176 Seeker at a rate of 10:1 for men. The Tech: Carbon is an excellent reinforcement and Transcend has 4 layers of it. IM7 unidirectional and Double Bias weaves make up the four layers of carbon in this ski. The carbon combines with a full kevlar laminate underfoot and a high end fiberglass called S2 glass. Our 7 layer construction with opposing weaves and composites creates a quiet at speed, playful and super strong platform that dwarfs the industry standard of 2 layers. Of course only the fastest carbon-impregnated base material is used, stone ground to perfection. Transcend also uses a resin-infused honeycomb tip and several layers of VDS rubber to control damping and durability. To top it all off, and to make our product highly durable, in the sandwich of the cap construction we are using carbon nanotube resin. With billions of carbon nanotubes in the matrix, our edges and cap are tougher than anything out there. Tested this past season and stock on all 2020 skis, additional IM7 uni carbon layers have been added on the tip and tail. In addition, a basalt/innegra layer, one of the toughest fabrics on the planet for impact has been added underfoot to fend off those pesky rocks. The Core: The core is the soul of the ski and the Transcend has a special one. Borrowing techniques often employed in bow manufacturing, we bring together many thin layers of grain-optimized Aspen. These are laminated tightly under the binding screws and run the full length of the ski, tip to tail. Then, high quality quarter-sawn Sitka Spruce, that could easily have gone into a guitar, is inserted to lighten the core and smooth out the ride. On top of all that, a piece of quarter-sawn White Oak is top-laminated for binding retention and power transfer to the edges. Visit Instinct's website for more info: https://instinctskis.com/skis/transcend/

The SCOTT Celeste Tour is the new generation of the iconic Celeste III made for women's feet. A perfect blend of light weight, walkability and comfort for the demanding conditions of high-mountain ski-touring. The new Cabrio Hybrid construction ensures easy mobility of the cuff for climbing and gives the skier solid support during turns. The Rear Hook Walk System is simple, strong, and dependable, delivering powerful energy transfer for skiing with a high range of walk mobility. The boot is made of Grilamid® material and features a flex index of 110 AT. Progressivity and comfort are the key benefits of this version. Also the handeling has been improved for easy buckle adjustment and step in the boots. Composition POWERLITE 2.0 Grilamid® Cabrio Hybrid Construction Dual Flex Action Tongue Flex Index: 110 Last width: 103.5mm Forward lean: Adjustable 12° or 14° Cuff Rotation: 60° Liner: PWR Lite High Closure: 3 Ergal® Micro Adjustable Buckles + Cable closure + Dynamic Power Strap Features POWERLITE Tongue Rear Hook Ski/Walk System Full-length Vibram® bi-density rubber Shock Damper Inserts Lock Catches Women's Fit System: ISO Touring (UNI) Dynafit® certified tech inserts Size: 23-27.5 Approx. weight: 1150g (size 24.5)

The SCOTT Cosmos Pro is made for those who have no limits. Long expedition and downhill performance is the program of the boot. It's made of Grilamid® mix material and features a flex index of 125 AT. The Cabrio Hybrid construction delivers a 60° range of motion for easy and convenient walkability, while also providing support for downhill skiing. The smaller last and the BOA® inner liner ensure a great fit, performance and comfort all day long. Handling has been improved for easy buckle adjustment and step in the boots. Composition - POWERLITE 2.0 - Grilamid® mix - Cabrio Hybrid Construction - Dual Flex Action Tongue Flex Index - 125 Last width - 102mm Forward lean - Adjustable 12° or 14° Cuff Rotation - 60° Liner - PWR Lite BOA Closure - 2 Ergal® Micro Adjustable Buckles + Cable closure + Power Strap Buckle Features - Dual Flex Action Tongue - Rear Hook Ski/Walk Mechanism - Adjustable forward lean - Full-length Vibram® bi-density rubber - BOA® Fit System - Thermo and Memo fit liner foam System - ISO 9523 Touring (UNI) - Dynafit® certified tech inserts Size - 23-31.5 Approx. weight - 1400g (size 26.5)

When deep powder is in the forecast and big terrain is on the menu, reach for the Locator 112. With a modern shape optimized for huge float and high speeds thanks to a longer radius and lower profile camber and rocker, the big dog of the Locator Series is primed for those dream days when everything lines up. A touring-focused design with a lightweight construction means even though the 112 devours descents it's efficient on the uptrack and serves up no-nonsense performance for when the backcountry demands your ultimate attention. That's a good thing because chances are you're going to want to take another lap.

Enter the no gravity zone with the ARW 116 VJJ. Ultralight construction courtesy of a Caruba Core and 1.7 Lightweight Edge sheds weight, helping make ARW 116 VJJ the most well-rounded womens powder ski out there. Featuring EST Freeride Rocker for increased maneuverability slashing pillows and charging through the trees along with Smear Tech, 3D beveling on the tips and tails of the base, the VJJ allows for limitless directions of floating through pow, no matter the terrain.

One-Liner: Take control of the mountain The Mindbender Team men's-specific ski boot is new for the 2022-2023 season and is packed with performance enhancers. We increased the flex rating to 140 and kept the weight down to create a ski boot that's stiff, powerful, nimble, and ready to take on both lift-assisted or backcountry endeavors. Take control of the mountain with K2's customizable Powerfit Pro Tour liner, Powerlite Shell, and a walk mode, giving skiers 50 degrees of range of motion. POWERLITE SHELL: Powerlite Shell - 1650 grams @ 26.5 - 4 different stiffnesses of TPU and optimal wall thickness come together for high performance and lowest possible weight. The totally new shell is purpose-built to result in the best skiing, lightest weight boots ever produced. Made with four different stiffnesses of TPU and optimized wall thickness profiling, the Powerlite Shell achieves a paradoxical balance of lightweight agility and power. The resulting boots weigh in as some of the lightest alpine and freeride on the market, yet they ski with all the power and drive of heavier boots. Rounded out with FastFit ease of entry and full TPU boot fitter customization capabilities, the Recon, Anthem, and Mindbender boot collections have raised the bar and proven that truly LESS IS MORE. POWERLOCK SPYNE: Rugged, precise, and intuitive. The Powerlock Spyne walk mechanism allows for a 50-degree range of motion when hiking and an unforgiving, powerful connection while skiing. The mechanism can also be adjusted to customize the forward lean of the boot between 10-17°. FASTFIT INSTEP: Softer TPU material is used in the instep area of select models' shells for quick and easy entry and exit. FULLY HEAT MOLDABLE: Both the boot's shell and cuff are capable of being heat-molded to a variety of foot shapes for a true custom fit. INTEGRATED TECH FITTINGS: Fully integrated into the shell injection, instead of just the outsole pods, makes our outsoles compatible with both DIN-alpine and Tech bindings.

Salomon’s S/LAB MTN SUMMIT boot strikes the perfect balance between the lightness needed to effortlessly go up, and the reliable performance required to ski down. The ultra-light Ultramid® Shell, 70 mm wide Dual Powerstrap and thin liner deliver the precise calf-wrapping and consistent tightness needed to conquer even the most extreme routes. Touring efficiency - Weighing exactly 1 kg and with a 75° range of motion that will help your foot effortlessly maintain its natural rolling motion, this boot makes hiking up as easy as it gets. Downhill performance - The Carbon spine creates a super-strong shell-to-cuff connection, so you experience the consistent, powerful flex needed to ski down the steepest terrain with confidence. Precision - The micro-adjustable BOA® Fit System combined with a strategically placed ankle strap creates Salomon’s innovative Touring Belt, for a customized fit and unbeatable heel-hold.

The SCOTT Cosmos Tour is the new generation of the iconic Cosmos III. A perfect blend of light weight, walkability and comfort for the demanding conditions of high-mountain ski-touring. The new Cabrio Hybrid construction ensures easy mobility of the cuff for climbing and gives the skier solid support during turns. The Rear Hook Walk System is simple, strong, and dependable, delivering powerful energy transfer for skiing with a high range of walk mobility. The boot is made of a Grilamid® material and features a flex index of 120 AT. Handeling has been improved for easy buckle adjustment and step in the boots. Composition - POWERLITE 2.0 - Grilamid® - Cabrio Hybrid Construction - Dual FlexAction Tongue Flex Index - 120 Last width - 103.5mm Forward lean - Adjustable 12° or 14° Cuff Rotation - 60° Liner - PWR Lite High Closure - 3 Ergal® Micro Adjustable Buckles + Cable closure + Dynamic Power Strap Features - Dual Flex Action Tongue - Rear Hook Ski/Walk Mechanism - Adjustable forward lean - Full-length Vibram® bi-density rubber - Lock Catches - Thermo and Memo fit liner foam System - ISO 9523 Touring (UNI) - Dynafit® certified tech inserts Size - 25-31.5 Approx. weight - 1390g (size 26.5)

The perfect backcountry partner is someone who is up for anything and will never let you down whether the conditions are all time, apocalyptic or something in between. Sounds a lot like the Locator 104. Multi-day hut trip in your future? The lightweight construction will keep you going on the skin track. Blower pow in the sidecountry? Ample rocker and a blended tail shape let you point it down the fall line or throw it sideways in bottomless snow on demand. When you need one ski with a soft snow focus that can do it all with predictable performance, the Locator 104 is ready.

The ARW 106 UL is the evolution of the long-sought one-ski quiver for the shredder who does a little bit of everything. An ultralight Caruba Core lowers the swingweight and keeps things light when boosting airs or hitting the bootpack to get that secret stash. The Smear Tech base's edgeless beveled tips and tails help the ski effortlessly float in powder and charge through crud without deflecting while enabling a surfy feel and catch-free butters. With sizes going up to 180 and 188, we expect plenty of your guy friends looking for versatile performance with a unique, ultralight construction to pick these up as well. Chase powder, lap the park, carve up groomers and slay the bumps. The ARW 106 UL is ready for anything.

One-Liner: No-compromise freeride performance The all-new Recon Team is the Recon Pro's rebellious twin. Featuring the same stout 140 flex and fully customizable Powerfit Pro liner, this ultra-precise high-performance boot features an Integrated Tech Fit at the toe of the boot for full compatibility with the new generation of freeride tech bindings. Equipped with a Powerlight Shell, Energy Interlock, and Gripwalk Outsoles you'll have no problem hitting that line you've had your eye on all season.

SPIN, BUTTER, AND RIP ALL OVER THE MOUNTAIN A staple in our lineup, the LINE Sir Francis Bacon continues to be a favorite among our team and fans alike. Equipped with a versatile 107mm waist width paired with 3D Convex Tech, the Bacon floats and butters through powder without sacrificing hard-pack performance. Slash through wind lips, butter over rollers, and experience the playfulness and versatility the Sir Francis Bacon has to offer.

The groundbreaking downhill performance to weight of the S/LAB MTN boot gets a fit boost this season, with the addition of Custom Shell HD Now, more skiers can experience the incredible uphill and downhill performance of MTN, with a completely customized fit in just ten minutes. Downhill Performance - MTN uses a Carbon Spine with Surelock mechanism, to switch from ascent mode to charge down big terrain mode. Oversize Pivot assures the lateral support and transmission you expect from a pure performance machine. Fit - With the addition of Custom Shell HD the shell and liner are both formed to fit your feel perfectly, in just ten minutes. Touring Capability - Under 1.6kg, a 47° range of motion, and great fit, this boot makes it easy to climb to the top of your favorite couloior.

The RCS Skate Plus is a legend in the race world and now this former World Cup champion comes with the new lower and shorter tip construction for minimum swing weight and highest agility. It features Cold Base Bonding for improved wax absorption and grindability. Optimized for use at 14°F (-10°C) and warmer. Air Core Carbon The most successful ski core with over 80% air content for extremely light weight. Optimum performance thanks to torsion-free and break-resistant technology. CFC - Computer Flex Control For racers. Minimises differences in residual tension and camber pressure. Top climbing and kick performance. Cold Base Bonding The revolution in ski making: Speedmax technology to protect the homogeneous molecular structure of the base for perfect wax absorption. Guarantees maximum speed. DTG World Cup Plus Deeper and coarser Plus structure, ideal for warm and moist conditions. Produced using natural diamond. Finish First The finishing touch now comes from Finish First: the term that covers and unites all the individual technological steps in the course of the final treatment of the base. Precision Pairing System The next generation in ski pairing: fully automatic dynamic measurements of a multitude of pairing criteria ensures precise ski choice and optimized pairing. Prewaxed Infrared preparation with hot wax. Best gliding properties, protection against dirt and oxidation. Powered by VAUHTI. Sidecut World Cup Skate Arrow-shaped sidecut for improved performance and dynamics especially for the 1:1 skating technique. Skating 115 Special camber and snow contact points further apart from each other mean increased stability and a more powerful kick action on hard snow. World Cup Tip The new lower and shorter tip construction follows the demands of real racing. It reduces the ski's swing weight to a minimum, enabling the highest agility. - N17522

The RCS Skate Plus is a legend in the race world and now this former World Cup champion comes with the new lower and shorter tip construction for minimum swing weight and highest agility. It features Cold Base Bonding for improved wax absorption and grindability. Optimized for use at 14°F (-10°C) and warmer. - N17622

Sammy Carlson is one-of-a-kind, and he needs more than a single unique ski to handle all the creativity he unleashes on the hill. The Whitewalker 121 is the big brother to the original Whitewalker, designed for Sammy's full-throttle charging on the deepest days. It's the ultimate pow-crushing freestyle tool. The 121 waist delivers massive float to swivel, slash and stomp forwards, backwards and sideways in the most epic conditions. The ultralight core means the Whitewalker 121 is light enough for big days in the backcountry during huge storm cycles, while the stout flex with Swivel Tech 3D beveling in the pin tip and tail deliver versatility for everything from charging steeps to buttering pillows.

The RCS Skate Plus is a legend in the race world and now this former World Cup champion comes with the new lower and shorter tip construction for minimum swing weight and highest agility. It features Cold Base Bonding for improved wax absorption and grindability. Optimized for use at 28°F (-2°C) and colder.

One-Liner: An all-terrain freeride weapon. Like its Mindbender peers, the 108Ti men's freeride ski delivers versatility at any speed, and in any conditions. Equipped with a mid-fat waist, long turn radius, and an All-Terrain Rocker profile the 108Ti comes together to create a stable, unflinching freeride experience. Its Titanal Y-Beam construction keeps things damp when speeds are high, and conditions get choppy. At arguably one of the most versatile widths in the Mindbender family, the 108Ti's let you forget the forecast, and focus on your line. - Dimensions: 137 - 108 - 125 - Rocker: All-Terrain Rocker - Edge Bevel: 1.5 x 1.5 - Drill Spec: 4.1 x 9.5 - Core: Aspen Veneer - Tech Features: Ti Y-Beam ALL-TERRAIN ROCKER Gradual rise in the tip for great versatility in all conditions, with a low, short rise in the tail for added control in variable snow. TITANAL Y-BEAM: Titanal has long been used in high-end skis and is known for providing a damp, stable ride at high speeds and on variable terrain, but our Y-Beam technology takes things a step further with dramatically enhanced performance tuning. Y-shaped prongs set over the edges in the shovel of the ski provide precise, powerful turn initiation, while the narrower metal shape in the tail of the ski provides the support you need for charging while still remaining maneuverable, forgiving, and easy to break free from turns. You can find Titanal Y-Beam technology on our Mindbender 108Ti, Mindbender 99Ti, Mindbender 89Ti, Mindbender 99Ti W, and Mindbender 89Ti W skis.

K2’s all-new Pinnacle Pro is our gift to freeriders needing a lighter boot with the power of the Pinnacle 130. We’ve streamlined its lightweight, eco-friendly, and temperature-stable Pebax® shell and integrated tech fittings into the shell injection, making the Pinnacle Pro compatible with both alpine and tech bindings. The K2 Pinnacle Pro was designed to climb quicker and barrel back down like a backcountry boss.

LIGHTWEIGHT, INTUITIVE, AND READY FOR ALL-MOUNTAIN RIPPING The most versatile ski in the Blade Optic Collection, the LINE Blade Optic 104 is right at home charging big mountain laps to cruising smooth burns on early morning corduroy and everything in between. Equipped with our Gas Pedal Metal Overdive™ tech, you'll harness the power of an innovative layup of titanal to feel enhanced edge grip, stability, and control under your feet. Get ready to kick it into the top gear and ski with confidence on the award-winning Blade Optic 104. 5CUT™ Multi-Radius Sidecut: - FIVE different radiuses are blended into the ski’s sidecut. The result? A wide variety of turn shapes and an intuitive feel. Gas Pedal Metal: - Titanal focused across the ski width provides increased edge grip and torsional stability while maintaining a lively feel along the length of the ski. Two independent tip and tail Titanal pieces add extra power and energy.  EARLY RISE: - The tip and tail lift away from the snow to bring the contact points closer to the center of the ski. This increases a ski's lift in deep snow and allows it to engage more quickly on hardpack when rolled over on edge.  SIDEWALL CONSTRUCTION: - Ultra-High Density Polyethylene vertical walls over the edges absorb vibrations and provide powerful energy transmission. ASPEN VENEER CORE: - An amalgam of Aspen Stringers brought together for a lightweight, snappy, and engaged feel. DIRECTIONAL FLEX: - The softer tip floats & initiates turns easily while the stiffer tail provides power, stability & high speed control. FATTY BASE & EDGE™: - 30% thicker base & edge, 2mm wide x 2.5mm high steel edges and 1.7mm thick base dramatically increase durability and tuning life the skis. Overdrive™: - Titanal focused vertically throughout the ski, extending throughout the tip and tail designed to add stability, power, and precision. THIN TIP™: - A thin core & sidewall in the tips are 100 grams lighter per pair for reduced swing weight & tip bounce.

Created with THC Technology, just like the Vision Collection, the LINE Pandora 110 marries deep snow performance with hardpack and touring capabilities. Featuring a refined rocker profile, attuned tapering, and a functional 110 waist width, the Pandora 110 will float through pow, arc on groomers, and fight fatigue on the skin track. Drop in on this award winning team favorite and prepare to see the light. - CORE: Partly Cloudy - SHAPE (mm): 144-110-130 - BASE: Sintered 1.3 - WEIGHT/ SKI (g): 1,500 - FLEX: Directional Flex - SIDECUT AVG. (m): 16.5 - GEOMETRY: 5-Cut - STANCE (mm): -44.0 - CONSTRUCTION: Sidewall - PROFILE (mm): 10-5-7 - EDGE (mm): 2.1 x 2

Built for women wanting to make it to the top with some energy to spare, Salomon’s MTN SUMMIT PRO keep you light when going up and stable and performant when it’s time to ski back down. Featuring a lightweight shell, reliable Powerstrap with wide Powerplate and touring liner, these boots are the perfect companions for every touring adventure. Touring efficiency -At only 1 kg and with a super-wide range of motion, this lightweight, women-specific boot with full rubber sole adds a layer of effortlessness to your touring adventures. Downhill performance -The homogenous flex, new Powerstrap with wide Powerplate, and women-specific liner will give you the precision and comfort needed to face even the most challenging terrain. Precision -The micro-adjustable BOA® Fit System combined with a strategically placed ankle strap creates Salomon’s innovative Touring Belt, for a customized fit and unbeatable heel-hold. Alpine Boot last: 99/105 Weight: 1020 g Norm: Touring Tech inserts: Yes

Designed for skiers who love to charge through unspoiled powder at high speeds, but are tempted by the occasional escapade to hike a new peak, this boot combines the stability and power of a true alpine boot with the versatility of a touring boot that lets you enjoy the whole mountain. In bounds or out of bounds, the shift has never been easier! Legendary fit - S/PRO's 100mm inclusive fit and anatomically designed Seamless liner combined with a softer Sensifit insert provide an exceptionally easy entry and anatomical wrapping. Performance proven - The Coreframe insert delivers improved terrain feedback and power transmission for a unique downhill performance. Backcountry commodity - At 1.67kg, this boot makes it easy to hike up. The Surelock mechanism and liner's walk function increase cuff mobility, while the LT insert ensures direct power transmission. Integrated tech inserts - Low-tech inserts are integrated into the shell, making it complementary to touring bindings, so you can experience reliability and direct power transmission. Coreframe - The Coreframe brings lightness, enhances sensations, and increases power. It is an insert that guarantees the boot's stiffness after the Custom Shell HD process. Surelock skiwalk mechanism - Secure and simple walk mechanism, that enables a great range of motion for walking, and locks for skiing performance. Midgrip sole - A Contagrip piece between the toe and heel and GripWalk pads improve the boot's grip in difficult terrain such as rocky summits, ice, and other uneven surfaces. Polyamid + XECARB Composite coreframe + Custom Shell + sensifit insert Custom shell HD - The Custom Shell HD process aims to bring fast personalization to the lower shell of your boots in just 10 minutes. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power, and direct transmission. Sensifit insert - The soft PU Sensifit insert on the external side of the shell makes it super easy to step in the boot, delivering easy step-in and anatomical wrapping of the instep. Polyolefin - More durable material, also providing lightness and stability. Polyamid spine - This specific polyamid piece is the secret element providing a good range of motion in hike mode and a true alpine flex in downhill mode. My CustomFit 3D Seamless Race with walk function - This Seamless Race liner features a softer part that bends easily to follow the movement of the cuff in hiking mode and ensures a natural movement of the leg when touring. Sense claw 45mm - Two positions for adapted fit and sensations options. The unhooked position allows you to reach the right level of progressiveness and rebound, while the hooked position ensures maximum stiffness and performance. Gripwalk ISO 9523 - GripWalk pads are pre-mounted and their specific shape improves walking comfort and grip whatever the conditions. Riveted oversized pivot - The Riveted Oversized Pivot ensures perfect power transmission between cuff and shell. 4 riveted aluminum 3D - Choose from 3 different positions of the instep buckle for optimum in-step comfort, full customization, and personalized foot hold. 2 hiking hooks - Two additional hooks placed on both cuff's buckles expand the range of motion and mobility of the boot when it's in hike mode, improving your comfort when heading up towards a peak.

The Freeguide Carbon ski boot is the new standard in freetouring ski boots. The incredible fit of the carbon fiber shell offers precise and powerful energy transmission for ultimate downhill performance. The walkability of the boots is permitted by an integrated ski/walk mechanism and a 2-part tongue that allows a 60° cuff rotation. The all-new inner liner with a BOA® Fit System ensures exceptional comfort, keeping your feet warm and delivering precision with the micro-adjustable locking system.

These all-mountain boots will underwrite your quest for touring fit and performance. They hike up like light touring boots and ski down like nimble downhill chargers. With 63-degrees of motion, they feel easy and natural on a long hike up. Thermoformable liners tune the fit with precision, and the thin shell walls keep them light enough to encourage you to put the skins back on and go up for another lap.

Designed to help you take your skate skiing skills to the next level, this ski set is designed to help you raise to every challenge you set your mind to. Made to excel in all snow conditions, it’s delivered as a pack so you just have to slide the Shift-In binding on the plate and go! Sustainable performance Blending the proven durability of Densolite with the lightness of recycled PET foam, the S-CORE 45 uses about 9 recycled plastic bottles to make 45% of the core’s weight. Stability and transmission The THIN PLY carbon construction optimizes torsional rigidity for improved energy transmission during the kick, while the balanced camber adds stability during the glide. Customize Grip & Glide While on your skis simply turn the shift-in button right for more edge grip, left for additional gliding sensations or keep it in the “0” position for the best of both worlds.

One-Liner: The tool you've been looking for. The FL3X Diverge SC was meticulously designed to meet the needs of Sammy Carlson's unique style. Whether Sammy's boosting backcountry kickers, hopping on the sled, or preparing to drop into a technical line, the Diverge SC delivers. Equipped with an Intuition Pro Tour Wrap, removable 120 Flex Tongue, and lightweight Diverge Tour 3-Piece Shell. The Diverge SC is the tool you've been looking for.

One-Liner: The definitive all-conditions, women's-specific freeride ski No one likes a one-trick pony. Every skier needs that one set-up that can handle it all and rip despite varying forecasts. That's why we built the women's-specific Mindbender 106C W. The 106C W features a mid-fat waist and a lightweight Aspen Veneer wood core, the perfect combination of float and fun. Coupled with Spectral Braid technology, these skis are stable despite their lighter construction and maintain complete maneuverability. Loved by pros like Delilah Cupp, lean into the Mindbender 106C W – you'll be in for one sweet ride. - Dimensions: 139 - 106 - 124 - Rocker: All-Terrain Rocker - Edge Bevel: 1.5 x 1.5 - Drill Spec: 3.6 x 9.5 - Core: Solid aspen - Tech Features 1: Spectral Braid - Tech Features 2: Carbon Boost - Tech Features 3: Slantwall ALL-TERRAIN ROCKER Gradual rise in the tip for great versatility in all conditions, with a low, short rise in the tail for added control in variable snow. SPECTRAL BRAID® Another implementation of K2's Torsion Control Design patented Spectral Braid is a first-of-its-kind variable-angle fiber reinforcement that allows for precision-tuned torsion and flex by altering the fiber orientation along the length of the ski. Lively, energetic, and composed, skis with K2's Spectral Braid have stability and control in spades while remaining extremely maneuverable. CARBON BOOST Longitudinal carbon stringers are laid on top of the core for added pop and rebound. SLANTWALL Adding a 30-degree angle to the sidewall in K2's Hybritech construction, Slantwall increases a ski's agility and responsiveness while maintaining accuracy and power.

The marquee ski in Salomon's all-mountain Stance line, the 96 is unrivaled in strength-to-weight ratio. This all-mountain driver offers a butter-smooth ride at any speed. Two titanal plates run the length of the ski to provide an impressive edge grip when the going gets firm and release torsional stiffness for poppy, powerful turns. - Alpine terrain: All Mountain - Level of practice: Advanced - Topsheet: Glossy - Norm: Adult Benefits: Maneuverable & Progressive A progressive frontside sidecut teams up with a full poplar woodcore and C/FX creating unmatched confidence when you're railing a turn on piste or racing through the glades. Power Metal Twinframe technology pairs with C/FX and a double Ti laminate to create a damp, hard-charging ski that inspires confidence regardless of speed, terrain, or conditions. Features: Full Poplar Woodcore A full Woodcore construction maximizes liveliness, stability, and ski-to-snow contact while filtering vibrations. Double Ti Double layer of titanal, one on either side of the core, improves hard snow performance. It increases precision, offers a good edge grip, and improves responsiveness. Metal Twin Frame A titanal layer provides improved stability, while the recessed windows in the tip and tail frame C/FX fiber layer help release torsion for increased maneuverability. All Terrain Rocker Rocker tip, early rise tail, and camber underfoot. Full Sandwich Sidewalls Full Sandwich Sidewalls guarantee stability and precision, it enhances performance by providing good edge grip and smooth ski-to-snow contact.