Tools

The Reverb is an advanced and complicated component and service becomes a breeze with this speciality wrench. Designed for use on the inner seal head and upper collet of both 30.9 and 31.6 millimeter version of the Reverb dropper post. This series of wrenches comes as a result of our collaboration with RockShox to develop a series of tools specifically for their suspension components. Built to hold the thin aluminum parts of the dampers to avoid damage. These wrenches are built with the same tool grade aluminum to tight tolerances to give you years of trouble free use. They will not damage or mar the sensitive parts inside your seastpost when used with care, keeping you and your customers happy. They also feature a 3/8" square drive in the middle to use with your favorite torque wrench during reassembly.

Many athletes are fortunate enough to be able to ride nearly anything. For those that are sensitive to bike fit though, replicating fit to a new bike or confirming fit after travel can be a challenge involving lots of trial and error. This set of tools allows accurate and repeatable measurements for saddle height, angle and setback. The accuracy and repeatable measurements also serve as a base to make adjustments to fit. -The magnetic saddle height bullets ensure you get an accurate center at the BB by locating in the crank arm fixing bolt or the crank arm preload cap of Shimano caps. This allows you to focus on the smart end of the tape measure at the saddle plate. -Two reference marks on the saddle plate means you can pull a measurement to the exact same spot relative to the nose of the saddle every time. This gives you accuracy down to a single millimeter. -The front of the saddle plate is engraved with a ruler, to allow you to calculate saddle setback at the saddle. This allows you to drop the plumb bob off the side of the bike and clear all of the bottle cages. -The wide plate has ample room to mount a level, protractor or smart phone for adjusting the angle of the saddle. This is particularly helpful for non traditional saddles like SMP and Adamo.

Brake pad spreader tool for Avid Elixir brakes.

Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes

SRAM Bleed Kit for maintaining SRAM disc brakes. Includes 2 syringes/fittings, bleed blocks, Torx tool, Crow's foot, and Bleeding Edge Fitting. - For SRAM X0/ XX/ Guide/Level/Code/HydroR brakes - Improved sealing and durability - New rotating metal hose fittings - High volume hose with clamp - Longer lasting - Must-have for all mechanics - NOT compatible with RockShox fork bleed kit - Brake fluid sold separately

This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.

Essential tool in mini size An essential tool for modern riders with tubeless tires, road or dirt. The Mini Plugger is a quick, one-shot tire-plugging system with a tiny profile to easily store and access in pockets, bags, or packs. A self-contained rescue tool when and where you need it most. - QUICK FIX - No need to remove the tire, just quickly access your Plugger tool, repair the tire, inflate, and go! - 5 PLUGS - Includes 5 tire plugs, internally stored - LIFETIME WARRANTY

Essential tools in mini size The Mini-Switch is an essential tool kit with a slim profile to easily store and access in pockets, bags, and packs. Outfitted with a technical bit offering appropriate for most performance-oriented bikes, in a tool bit platform that we are all used to using at home. - 6 TOOLS - Top six tools for most modern bikes. 3mm, 4mm, 5mm, 6mm, Allen bits and T25, T30 Torx bits - HEX BITS - Easy to switch out tools. A durable, time-proven, six-sided bit design - LIGHTWEIGHT - Extremely light and compact tool set that's unnoticeable while riding - LIFETIME WARRANTY

8 functions—we've gone out of our way to pack this tool with as many useful functions as humanly possible. The selection, length, and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 110 grams

The only wrap that's better than this is an actual burrito. Blackburn's Outpost Wrap Bag is a clever compartmentalized tool wrap that fits all your essentials for a big day. And if you're just heading round the corner, just zip off the smaller section and carry only what you need. - Straps can mount to frame in multiple locations for a secure fit - Several mesh and slip pockets, room for everything - Weight: 80g / 2.8oz

13 functions—we've gone out of our way to pack this tool with as many useful functions as humanly possible. The selection, length, and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 13 functions - 145 grams

Those guys who said "Tubeless tires never get punctures"? They lied. The Blackburn Plugger Tubeless Tire Repar Kit is a quick, one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble. Pronto. - Stores ten plugs. - 27g tool only 47g tool with strap

The Switch Tool has evolved. We've all heard "if it ain't broke, don't fix it", but what if riders just want to fix more things? Enter the Big Switch, the larger sibling to the hit Switch tool. This new, compact, and super functional tool kit includes essentials you’ll find on the Switch including T25 and T30 torx bits, 2.5, 3, 4, 5, and 6mm allen bits, and a flathead screwdriver. The Big Switch also features an 8mm hex tool, and a chain breaker. The chain breaker handle includes size 0, 1, and 2 spoke wrenches, a disc pad spreader and a Presta valve core tool. Individual T or L handle tools let you access tight places and give you more leverage on bolts and screws. Go ahead, fix everything. - 15 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and a flathead. - Pocket sized nylon carrying pouch includes a stash for your I.D., credit card, and cash. - 134g

Customize the Switch Wrap Bag and load it up with your favorite tools. - Compact design—despite its near-limitless functionality, the big switch ratchet tool (sold separately) fits compactly in your hand thanks to a well-thought-out modular design allowing for leverage within the confines of a portable nylon wallet. - Customizable—wrap almost anything you need and take it with you. - Features specific sleeves for an inner tube, a 20g C02 cartridge, 2 tire levers, credit cards, and cash (sold separately) - Weight: 3.52oz - Lifetime warranty

Remember that time on the trail when your brake lever reach went out of whack? Unfortunately, your multi tool couldn't get out of it's own way to turn the adjustment screw. Blackburn's Wayside Multi Tool changes all of that. - Individual Hex Keys - The most common hex keys snap on and off the tool and can be used individually to be able easily reach and properly torque any bolt head. All keys feature a ball end. - Optimized Tools - The selection, length and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 19 functions - 200 grams / 0.44 lbs

Imagine if you could bring a tool box with all the essentials you’d need for bicycle maintenance with you on every ride. Well then, stop dreaming: the Blackburn Switch Wrap is already here. Spec’d with their Big Switch multi tool, the Switch Wrap provides you quick access to everything you’ll need to fix just about anything that could go wrong on a ride. The Wrap features specific sleeves for an inner tube, up to a 20g CO2 cartridge, and a tire lever. And, it keeps the Big Switch tools at your fingertips. When opened, the tool kit hangs from your saddle so you can grab what you need without spreading it all on the ground, so lost tools will only exist in nightmares. Minimal. Compact. Secure. Convenient. The Switch Wrap. - 15 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and a flathead. - Nylon carrying pouch features sleeves for 20g CO2 cartridge, tire lever and includes a stash for your I.D., credit card and cash. - Attaches to seat rails or to bicycle frame. - 186g

Your race mechanic on the go. Just because it's scaled down from a full-size ratchet doesn't mean it skimps on performance. The Big Switch Ratchet Tool takes the same simple necessities from the popular Switch and Big Switch and adds a convenient, ratcheting handle for even quicker, hassle-free adjustments. Extra-long 2.5 through 8mm Allen bits take care of business, along with T25 and T30 Torx, the renowned Wayside chain breaker, 0, 1, and 2 spoke wrenches, a disc-pad spreader, flathead, and a Presta valve core tool. You're covered. Fully covered. - Includes: T25, T30 Torx bits, extra-long 2.5, 3, 4, 5, 6, 8mm Allen bits, flathead screwdriver, wayside chain breaker, size 0,1, 2 spoke wrenches, disc pad spreader, Presta valve core tool

Ride essentials. Going for a ride but don’t know what to pack? No problem; we’ve got you covered. The local ride kit offers up what you need to get home; and extra carrying capacity to bring along anything else. With a seatbag, mini pump, mini tool and tire levers, this little kit, bundled in a compact package, has all the tools you need to get out there and keep going. - Blackburn's Local Seat Bag (Medium) offers extra space to pack your tube, wallet, phone, or whatever you want - Blackburn Heist 6 Multi Tool provides a quality tool to make sure your bike is adjusted properly for your ride - Blackburn's Mountain AnyValve Mini-Pump comes equipped with their popular and proven AnyValve head, which works on Presta, Schrader, and Dunlop valves. - 2x tire levers

Going for a ride but don't know what to pack? No problem, Blackburn has you covered. The new Local CO2 Ride Kit offers up what you need to get home, and extra carrying capacity to bring along anything else. - Local Small seat bag offers extra space to pack your tube, wallet, phone, or whatever you want - Wayside CO2 inflator with 16g cartridge - GRID 8 Mutli-tool provides a quality tool to make sure your bike is adjusted properly for your ride - 2x tire levers

Take greatness, add more = more greatness. The simply stellar Pro Plugger gains a few extra ingredients for surefire success, the it-makes-sense CO2’FER head combining an inflator and valve tool along with a 25g threaded CO2 and universal frame-mounting kit, mean everything’s always within reach, even on bikes with long reach. No need to scurry about rounding up odds and ends trying to beat dwindling daylight—simply grab bike, go and you’re already equipped with the Pro Plugger Combo’s on-bike tubeless repair system. - Pro plugger rubber mount, strap, core CO2 inflator and 25g threaded CO2 included - 4.64oz

Everything you need to keep your Penthouse Flat MK5 pedals feeling like new. Includes: - Small Bushing and Bearing Removal Tool - Small Bushing Press Tool - Big Bushing Press Tool - Bearing Press Tool

- Spare pin for UT-CN200 and UT-CN300

When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.

Service kit for Cane Creek suspension forks.

Allows safe installation and removal of Cane Creek Double Barrel bushings.

The ultimate trail-side companion. Details - 13 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 164g

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime

Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty

The ultimate trail-side companion. Details - 20 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Chain Tool: 8/9/10/11/12 speed compatible - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Open Wrench: 8mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener - Spoke Wrench: #0, 1, 2 - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 203g

Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - 8-12 speed chain tool is incorporated into the case - Spoke wrench : #0, 1, 2 & 3 - Magnetized storage case can be used as a handle for extra leverage

The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel. - Rubberized ergonomic handle - Unique "thumb flange" makes it easy to apply pressure to the tire bead - Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims - Lifetime warranty

- bearing tool for Vault, V18 or V14 models

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - This professional tool is designed for precise fit and prevents rounding of nipples - Metal nipple interface contacts nipple on all four surfaces - Fits 3.25mm square nipple interface

The DT Swiss truing stand is the stand used by professionals. It is made of precision machined, polished, and anodized aluminum with hardened steel guides and mounts. - High-end quality and easy handling - Quicker wheel building - Compatible with all current bicycle wheels (12" – 29") with quick-release or thru-axle - Three precision multilink arms providing a wide range of contact points - Play-free precision gauges to measure lateral and vertical dish - Extremely stiff and solid clamping

The Dynaplug Racer Pro improves upon the legendary Racer's original design with Twin Tube technology. This allows you to store x4 pre-loaded plugs ready to go in a single tool. Snap-on caps protect plugs from dirt and damage. When your ready to make a repair, just pop off a cap to deploy either a standard size plug (with wheel-friendly soft brass tip) or the aluminum Megaplug for mega-big punctures. If you need more plugs just unthread the Twin Tube and flip it around for more plugging action! Machined in Chico, CA from US-made billet aluminum and stainless steel, the Racer Pro weighs 26g, only 2g more than the prior generation, yet delivers twice the puncture-defeating power! What's in the box: x1—Dynaplug Racer Pro Tool x1—Megaplug plug x3—Standard Plugs x1—Standard Twin Tube x1—Standard/Megaplug Twin Tube

The Dynaplug Pill (aka Micro Pro) is an ergonomic, compact repair tool that quickly fixes most punctures in tubeless bike tires. - Perfect for race situations, as the wheel stays on the bike - Repair plugs are compatible with UST and tubeless ready tires (both ATB and Road) - Less mess! (fix tire without dumping sealant) - Made in USA from machined solid billet AL6061 - 42g Kit includes: x1—Pill tool (dimensions: 2.25" x 0.875") x5—Brass soft nose tip repair plugs x2—Insertion tubes x1—Micro knife x1—Air stopper x1—Pipe cleaner

- Installs and seats against the inner race of the cartridge bearing for removal (punch from other side of tool against tool flats) - Effectively fits on cartridge bearings with 10-25mm inner race ID's

- Installation wrench for all Enduro TorqTite Bottom Brackets - Some TorqTite installations require two wrenches

- This tool allows you to swap out the chain rings on Cannondale cranks by removing the spider.

- The Pro bearing punch tool-kit allows fast removal of bearings in suspension linkages and hubsets. - The steel punches locate on the inside diameter of a bearing in order to drive the bearing out of the bore. - The bearing punch kit includes 8, 10, 12, 15, 17, 18 and 20mm sizes and include a tool roll for organized shop use and travel.

- Removes bearings from hubs and various other items - Works on bearings with an internal diameter of 8-32mm

- Tool for pulling and pressing bottom bracket bearings. - For all BB30 frames and bearings - Allows the bearing to be pulled without damage for cleaning and re-greasing - Also safely presses bearings back into cups - Instructions included

- Hub bearing press set with 10 guides - For ID 8-20mm

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts

- Single 29mm open bore drift for use with 1/2" rods

- Installs and removes threaded cups for 386Evo cranks - Socket type tool for 1/2" drive socket wrenches

Regular chain and component cleaning is a chore no more thanks to Finish Line's Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too.

Regular chain and component cleaning is a chore no more with Finish Line's Starter Kit 1-2-3. It starts with Finish Line's popular Multi Degreaser for cleaning, and their versatile Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too. Then, after cleaning, get your bike running smoothly and silently again with the included Finish Line Dry Teflon lube and you're good to go!

The Easy-Pro Brush Set includes 5 different brushes that make easy work of all bike-cleaning jobs. Use them to remove mud, dirt and road grime from your frame and components. The package comes with a features-and-benefits guide that explains the multiple uses of each brush. Also included is a chain for hanging the brushes when they're not in use.

Finish Line's Shop Quality Chain Cleaner is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning, while your hands stay clean. Plus, its rugged plastic construction is virtually unbreakable.

Finish Line's Shop Quality Chain Cleaner Kit is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning. Your hands stay clean, too! Plus, its rugged plastic construction is virtually unbreakable and the kit comes complete with a 4-ounce bottle of EcoTech Degreaser concentrate and a 2-ounce bottle of Dry lube. Use it for a cleaner and smoother-shifting chain.

- Quality alloy construction makes valve core removal and installation a breeze. - Designed for a lifetime of use to keep you rolling for years to come.

- Hardened tool steel. - Chrome plated. - Fits 10, 11, 12, 13, 14, and 15 spoke nipples. - Knurled outside edge provides a sure grip.

- Chrome-plated chain tool. - Compatible w/ HG, IG, and UG chains. - Extra-long knurled handle for good leverage. - Adjustable backing support braces the backplate of the chain. - Replaceable driver pin.

Package of 10 replacement tire plugs for Clutch Bar End storage

- Replacement presta valve cores - Package of 10

- CNC side panels with a lightweight, easy to carry, ultra-compact design - Durable, corrosion-resistant nickel-plated design - Tools: 3, 4, 5, 6mm Hex, PH2, T25 - Sizes: 70 x 30 x 8mm - Weight: 74g

- Replacement chain breaker for Clutch Crank storage

- CNC side panels with a lightweight, easy to carry, ultra-compact design - 8mm hex bit combines easily with 5mm allen wrench - Independent valve core tool - Tools: 2, 2.5, 3, 4, 5, 6, 8mm Hex, PH2, T25, SL5, Valve Core Tool - Sizes: 78 x 40 x 8mm - Weight: 93g

Giant Tool Shed Chain Tool is a compact chrome chain tool for servicing, removing, and replacing chains. - Fits 8-11 speed chains - One-piece die-casting - Double-sided replaceable pins - Integrated bottle cap opener - Chain clip