Lubes/Cleaners
$39.99
Shock Oil is a semi-synthetic formulation that combines the best of available oils and additives for a super suspension oil. It's fully compatible with all systems and internal components, seals and O-rings. Its viscosity stays constant as the temperature changes, so your shock feels the same whether you're roasting or freezing!
$26.99
Finish Line® Speed Degreaser™ is the fastest way to clean a bicycle drivetrain. Dry-degreasing technology requires no water rinsing as it evaporates rapidly after application to leave no residue. It's innovative turbo sprayer uses mechanical agitation to blast away contaminants from metal components. Speed™ is formulated with advanced solvents to quickly breakdown grease, grime, dust, and dirt. For most applications Speed™ requires no additional brushes or tools. Speed™ leaves no residue so lubricants can be applied to the chain immediately after application.
• Dry-degreasing technology requires no water rinsing
• Innovative turbo-sprayer blasts away contaminants
• Advanced solvents breakdown grease and grime
• Dries rapidly to leave no residue
• Leaves bicycle chains clean and ready for fresh lubrication
$18.99 - $23.99
Finish Line® 1-Step™ is perfect for commuters and recreational cyclists seeking a quick and easy clean and lube solution. 1-Step™ loosens and removes surface grime, before leaving behind a clean, low-friction film of high-performance lubricant. 1-Step Cleaner & Lubricant helps prevent premature component wear, reduces pedaling friction, and eliminates drivetrain noise. It’s formulated with corrosion inhibitors that provide excellent rust protection in extreme conditions and coastal salt-air. 1-Step™ does not compromise on its ability to reduce pedaling friction over long intervals.
• Fast and easy application
• Cleans and lubricates chains in one simple step
• Penetrates to flush out old lube and contaminants
• Leaves behind a low-friction film of high-performance lubricant
• Reduces friction, prevents chain wear, protects components
• Can be applied to both clean or dirty bicycle chains
• Provides maximum rust protection, even in salt-air
• Ideal for commuters and cyclists on the go
• Apply to bicycle chains before putting into storage
$22.99
The Finish Line® No Drip Chain Luber™ is a smart tool designed to optimize the application of chain lubricants. This easy-to-use applicator ensures even coverage on every chain link, eliminating excess waste and mess. By using 50% less lube than traditional methods, the No Drip Chain Luber™ saves both time and money, making chain maintenance more efficient and cost-effective. This kit also includes a 4oz bottle of premium Finish Line® chain lubricant, ensuring top-notch performance right from the start.
$18.99
E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.
$12.99 - $18.99
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes.
- Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives
- Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection
- Upon application, wipe excess off chain to minimize attraction of dirt and grime
- Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.
$17.99
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
$17.99
- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings
- Prevents wear and distortion in headsets, hubs, and bottom brackets
$14.00
Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.
$14.00
Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.
$12.99
Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts.
- Engineered to rapidly clean disc brake rotors and pads
- Acetone-free formula
Page 1 of 1