Wax and waxing acces.

PURE PRO liquid glide waxes are based on the ingredients used in racing paraffin series and totally new additives, which give excellence performance and good durability to the product. PURE PRO liquid glide waxes have been developed especially for natural snow and fine grained snow. With high-quality solvents liquid waxes absorb effectively into the base and retains the performance of the ski base longer than hot melted paraffins. On its best when used on top of liquid base wax or traditional paraffin waxes. After wax has dry completely brush througly first with nylon brush, then with brass brush and again with nylon brush. PRO COLD for cold snow conditions, -2°C/-20°C I 45/27°F

PURE PRO liquid glide waxes are based on the ingredients used in racing paraffin series and totally new additives, which give excellence performance and good durability to the product. PURE PRO liquid glide waxes have been developed especially for natural snow and fine grained snow. With high-quality solvents liquid waxes absorb effectively into the base and retains the performance of the ski base longer than hot melted paraffins. On its best when used on top of liquid base wax or traditional paraffin waxes. After wax has dry completely brush througly first with nylon brush, then with brass brush and again with nylon brush. PRO WARM for damp snow, +7°C/-3°C

The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions

PURE ONE liquid glide waxes are based on the ingredients used in the racing paraffins and high-quality solvents, which give excellence performance and good durability to the product. PURE ONE liquid glide waxes are suitable for all snow conditions. On its best when used on top of liquid base wax. ONE POLAR For very cold snow conditions, -5°C/-25°C I 23/-13°F

PURE ONE liquid glide waxes are based on the ingredients used in the racing paraf?ns and high-quality solvents, which give excellence performance and good durability to the product. PURE ONE WARM liquid glide waxes are suitable for wet and damp snow. On its best when used on top of liquid base wax. ONE WARM for wet and damp snow, +7°C/-3°C

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS6L is especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. - HS6L is a versatile wax that works in all snow conditions, but performs at its best when the humidity is high. - Replaces the CH6XL. - -4°C to -12°C (25°F to 10°F).

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS8L is an extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above freezing and everything between. Basically a must have in conditions you will meet often. - Replaces the CH8XL. - -4°C to +4°C (25°F to 39°F).

- Performance Hot Wax for racing and training/ fluorine free - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f)

Universal liquid wax for cross-country skis, especially also suited for skis with a mechanical climbing system (fish-scale skis). For all kinds of snow and temperatures. Features: • Based on natural raw materials • Biodegradable • Improves sliding properties and cares for the base • Quick and easy to apply • With sponge applicator and integrated polishing felt • Comfortable pocket size to go and wax en route

F4 universal liquid glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Glide wax specifically for ski mountaineering and summer skiing - Preservative wax for metal edges - Easy application

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

Fluorfree kick wax for the cold to extremely cold ski trips. Light blue kick wax designed for dry and cold to extremely cold conditions. - Fluoro free kickwax - For colder ski trips - Made for racing - For new and new fallen fine-grained snow from -8°C to -16°C (18°F to 3°F). - Old/partly transformed snow from -12°C to -20°C (10°F to -4°F). Light blue kick wax designed for dry and cold to extremely cold conditions. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

Perfect for "real" winter conditions. Fluoro free, blue kick wax for cold and dry winter conditions. - Fluror free kickwax - For racing - For new and new fallen fine-grained snow from -4°C to -10°C (25°F to 14°F). - Old/partly transformed snow from -5°C to -14°C (23°F to 7°F). Blue kick wax is designed for dry and cold winter conditions. A safe choice for normal midwinter inland conditions. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

Allround, fluoro free kickwax for normal winter conditions. Fluoro free, purple-blue kick wax for normal winter conditions well below the freezing point. - Fluoro free kickwax. - A winner in the winter trails. - For racing - For new and new fallen fine-grained snow from -1°C to -5°C (30°F to 23°F). - Old/partly transformed snow from -3°C to -8°C (27°F to 18°F). Purple-blue kick wax is designed for normal winter conditions well below the freezing point. An obvious “next step” if VP40 does not provide a safe kick. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

An excellent wax for challenging conditions around zero degrees. For new and recent fine-grained snow from 0°C to 2°C. Old/partly transformed snow from 0°C to -4°C. Red/black grip wax with fantastic properties in difficult conditions around zero degrees. Also works well on the colder side at high humidity and transformed snow. The black additive is the guarantor for great flexibility and reduced risk of icing. VP65 works best with a couple of layers of a slightly harder wax as a base, and it also works very well for covering klister. Each layer is applied thinly and then smoothed out with a synthetic cork (T12). For a better result, it is recommended that the wax is cold when applied. The VP waxes are made primarily for top racers and serious skiers, but can be used by recreational skiers who want that little extra to get the very best wax for their ski trip. - Racing grip wax - Reduces risk of icing - Excellent dirt-repellent properties - Our second softest adhesive wax

F4 universal liquid glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Glide wax for ski mountaineering and summer skiing - Preservative wax for metal edges - Easy application

Perfect kickwax for moist, new snow, and shiny tracks. Fluoro free, purple-red kick wax that works well in moist new snow and shiny tracks. - Good water-repellent qualities. - Recommend to apply cold. - Fluoro free kickwax. - For racing - For new and new fallen fine-grained snow from 2°C to -1°C (36°F to 30°F). - Old/partly transformed snow from -1°C to -4°C (34°F to 25°F). Purple-red kick wax works very well in moist new snow and shiny tracks. Will also work on older, slightly transformed snow some degrees below the freezing point. If tricky conditions around zero VP65 is recommended. The wax contains a new additive designed to impart maximum lubricity. This improves the stick-slip properties of the wax and gives an excellent feeling. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). Applying the wax when it is cold will ease the application process. The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

For wet and moist new snow. Works also on wet transformed snow down to 0°C (32°F). Apply thicker if very wet.

Very soft special wax with low melting point. Ideal for base cleaning and use as basic care of new skis - Penetrates very deep into the base - Biodegradable - Resealable wax case - Base cleaning: Wax the base and remove again while the wax is still warm. Snow temperature recommendations: - Yellow 32F to 21F - Red 25F to 10F - Blue 14F to -22F

Great in challenging conditions! Universal silver klister for recreational and racing skiers. Gives a great kick. Temperature range +3°C to -5°C (38°F to 23°F). A very flexible klister, working on both sides of freezing when conditions are changing between coarse and transformed moist to wet fine-grained snow. Scraper included.

Superior durability! Baseklister in the KX series, for all conditions. For enthusiasts and racers, great durability. Base klister for cold and warm conditions. To be used as the first layer for better adhesion of other klisters to the base. High wear resistance on ice and hard coarse snow. Always apply indoors with a waxing iron appr. 110°C (230°F). Only cover the sanded grip zone. Heat the tube slightly for easier application. By “edging” the waxing iron you get a controlled equal distribution of the klister. Scraper included.

Fantastic mid-layer klister! The KX klisters are durable klisters custom-made for different conditions. Temperature range +1°C to -4°C (32°F to 25°F). Excellent klister on transformed cold coarse corn snow starting to get wet. Midlayer klister applied on Base klister (KX20 or KB20) to avoid that the top layer klister slides back into the glide zone. Scraper included.

Versatile towards dry snow! The KX klisters are durable klisters custom-made for different conditions. Temperature range +2°C to -4°C (36°F to 25°F). Developed for transformed and fine-grained snow. Very good when warmer than 0°C and relatively fine-grained snow. The klister that goes the farthest into dry snow without icing! Scraper included.

Great for typical klister conditions! The KX klisters are durable klisters custom-made for different conditions. Temperature range -2°C to +4°C (28°F to 39°F). All-round klister. For wet coarse snow as well as frozen corn snow. Scraper included.

Great grip in moist snow! The KX klisters are durable klisters custom-made for different conditions. Temperature range +1°C to +5°C (34°F to 41°F). For wet and moist coarse corn snow. Scraper included.

Great grip in very wet conditions! The KX klisters are durable klisters custom-made for different conditions. Temperature range +2°C to +15°C (36°F to 59°F). Wet snow klister. Used when the snow has a high water content such as slush, and the air temperature is well above freezing. Late spring klister. Scraper included.

The perfect tool for use with the Vauhti Pure series of liquid waxes. Use for cleaning and preparing the glide zones of your xc skis.

Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.