Tires/Tubes

- Trails, corners, berms, tables, kickers and everything else that's fun to ride are where the NEW HANS DAMPF feels most at home. - Extended limits due to greater stability, durability and performance. - Semi-open block arrangement for excellent self-cleaning with low rolling resistance - Aggressive smaller shoulder blocks for grip and control on loose and loamy ground

The Shredda Front tire was designed for the steepest uphill passages. A new Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control to keep you on the trail. - Literally sticks to the ground as the tire deforms more precisely at specific points - Profile optimized for radial carcass: Open tread design with high tread depth for excellent traction especially on soft surfaces - Radial carcass tires offer approximately 30% more contact area than conventional tires at the same air pressure. Even if the air pressure is increased by 50%, the contact area is still 15% larger - The carcass material overlaps for a shorter time and with less tension. As a result, the tire deforms more selectively and can react much more flexibly and adaptably to unevenness without sacrificing control - The increased contact area and the more flexible response behavior provide significantly more grip, more damping, more control and more comfort

The Shredda Rear tire was designed for the steepest uphill passages. A new Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control to keep you on the trail. - Radial carcass allows for a larger contact area: more grip, more comfort, and more control - Almost sucks itself to the ground because the tire deforms so precisely - Slightly shallower tread depth than Shredda Front, but more stable profile optimized for radial carcass: Open tread design with scooping effect and high tread depth for excellent interlocking - Especially on soft surfaces, it generates a lot of braking and propulsion traction

The fastest downhill tire in the world! - Developed over two years in the World Cup races, including with DH overall World cup winner Amaury Pierron - Optimized 100% for precision - For even more aggressive cornering, shoulder lugs are 10% more stable compared to the Magic Mary - Long braking edges allow later braking point - Open shoulder area provides direct feedback and improves self-cleaning - Ramps on center lugs for optimal rolling characteristics - Evolution line, Super Downhill construction - Addix Ultra Soft compound - ECE: E-50 - 1320g

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The legendary High Roller returns with an all-new hybrid tread design, built to take on mixed conditions at high speeds. The center tread uses a mid-spike design similar to the Shorty but with a lower knob height. These knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces. Cornering traction is enhanced via large, well-supported side knobs for predictable handling. - Recommended for intermediate enduro and downhill conditions - Tubeless ready construction, designed for front or rear use - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - Widely-spaced tread of the High Roller clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - 3C MaxxGrip + Downhill casing is ideal for Downhill racing and long travel e-bikes - 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

The DHR II is the gold standard for riders wanting maximum traction and cornering grip when trail conditions get loose and muddy. - Ramped paddle-shaped center knobs roll efficiently and provide excellent traction for climbing and braking - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium Compounds: - 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail - 3C MaxxTerra is an intermediate triple compound that provides additional grip but still retains excellent tread wear and rolling resistance qualities - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

- The DHF incorporates ramped knobs for low rolling resistance and channel-cut knobs to increase gripping edges, giving straight-line control and precise cornering. - The reference in Downhill and Trail tires - Front specific design, but the DHF also makes an excellent option for a rear tire, with its balanced driving, braking, and cornering traction - Plus sizes available - Wide Trail casing optimized for 30—35mm rims

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

With a tread design that deftly balances rolling speed with braking and cornering traction, it’s no wonder why the Minion DHF is one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs.

With a tread design that deftly balances rolling speed with braking and cornering traction, it’s no wonder why the Minion DHF is one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The DHR II is the gold standard for riders wanting maximum traction and cornering grip when trail conditions get loose and muddy. - Ramped paddle-shaped center knobs roll efficiently and provide excellent traction for climbing and braking - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium - 3C MaxxTerra is an intermediate triple compound that provides additional grip but still retains excellent tread wear and rolling resistance qualities - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing

As the name implies, the Maxxis Wetscream is designed for the most heinous muddy downhill race conditions imaginable. The Wetscream is a competition use only tire and it is intended for wet conditions only.

As the name implies, the Maxxis Wetscream is designed for the most heinous muddy downhill race conditions imaginable. The Wetscream is a competition use only tire and it is intended for wet conditions only.

The Ultimate Gravity tire! The iconic Magic Mary with radial carcass provides more contact area and even more grip. - Radial carcass allows for a larger contact patch and conforms to terrain, yielding more grip, more comfort, and more control - Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip even in muddy terrain - Equipped with V-Groves specially developed for Magic Mary, every stud can bite into the ground for even more grip - Angled studs in the middle of the tread optimize the rolling characteristics - TRAIL PRO version (Evo line) - Addix Ultra Soft compound - E-bike: E-50 - 1220g

Michelin Power Cross Mud's tread pattern transmits pedaling power more effectively in mud terrain for a controlled grip. - For low-pressure cycling on rugged terrain using specially adapted cotton reinforcements - PSI: 72 - Weight: 380g

Schwalbe's Ice Spiker Performance Line tire is the "turbo" of studded tires. It sports 361 spikes that bite firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The Ice Spiker is the best way to be agile and sporty while staying upright when the roads ice over. Note: In order to ensure that spikes are permanently fixed, tires should be run in for about 25 miles (40km) on asphalt, while avoiding any fast acceleration or heavy braking.

The P Zero Race TLR is the most performing tire in Pirelli’s portfolio, as well as being the first tire with a tubeless technology entirely made in Italy. The design features SpeedCore technology in a 120tpi casing, utilizing a layer of compound mixed with aramid that covers the inner layer of the tire, improving the smoothness and the resistance of the rubber. The result is a less stiff, but faster tire. The compound on the other hand, maintains the same advanced SmartEVO technology, commonly found in other high-performance tires throughout the P Zero range. - SmartEVO compound uses a blend of polymers to provide maximum grip with a low rolling resistance, allowing for maximum speed and control - Nero HighContrast sidewall delivers a minimalistic yet bold design, enhancing the finishing visual appeal with precise, high definition detailing - 700 x 28 and larger sizes are compatible with hookless rims - Hookless rims subject to ETRTO 5bar/73psi max pressure limitation