Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
The FLUX is a compact and realistic interactive direct drive trainer, with inner parts carefully selected to minimize sound levels. It combines FLUX Tacx direct drive technology with an electro brake in order to offer an accessible Smart and interactive direct drive. Simply remove your bike's rear wheel, mount the bike directly on the trainer, step on and start training. The Flux has been designed to enable you to really push your limits, especially when standing on the pedals. It offers the truest simulation of a pedal stroke as it is equipped with the heaviest flywheel to date - 7kg. The swift response of the Smart electronics and the flywheel transmit the slightest fluctuations in resistance directly and accurately to your legs. This trainer connects wirelessly to smartphones and tablets and knows the ANT+ FE-C protocol, enabling you to train with Tacx apps, as well as third-party apps like Zwift and TrainerRoad. You can also train stand-alone; if you do not connect the trainer it will simulate a flat road. It shows when it is connected to the mains and to a device over ANT+ or Bluetooth by an LED light on the side. The software receives the speed, cadence, and power from the trainer and controls the brake. With the Tacx Utility app, you can always benefit from the latest firmware for the Tacx trainer and check the connection with other devices. When an update is available, you receive a notification and you can decide whether you want to update your trainer. FEATURES - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Various Shimano, SRAM & Campagnolo cassettes - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available - Suitable bikes: Race, Tri & MTB, Not suitable for a long cage rear derailleur - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 1500 Watt - Max. slope: 10% - Simulation of descent: No - Max. torque: 22.1Nm - Max. brake force: 65N - Flywheel: Actual of 7kg - Mass inertia: 22.8kg - Calibration: Spin down - Footprint (lxw): 670×650mm (26.4×25.6in) - Height: 465mm (18.3in) - Dimensions when folded: Not foldable - Weight: 16kg (35.3lbs) - Article number: T2900 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <3%
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$54.99 - $70.00
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Don't miss out on any action! The Tacx GoPro bike mount can be placed on the handlebar or saddle to record everything that happens in front or behind you. Installing the bracket on your bike is very simple. After placing the mount on your bike, you can insert the camera into the holder easily and quickly and you are ready to record. - Easily switch between mounting options - Handlebar adapter can be used on road or mountain bikes - Saddle adapter works with 7mm and 9mm diameter saddle rails and is also compatible with the Tacx Mudguard - Compatible with GoPro HERO and HERO +, GoPro HERO 2, GoPro HERO 3 and 3+ and GoPro HERO 4 and 4+ models - Also suitable for any other camera with a base identical to that of GoPro cameras
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
Minoura Training Accessories like the ANT+ Minoura Heart Rate monitor with belt is a fantastic complement to your favorite trainer or roller. - Pickup and transmit your heart rate data with a comfortable fit - Low energy ANT + (2.4GHz) wireless protocol - Minoura is an official ANT + Alliance member - Universal on every ANT + device - Net Weight: 67 grams (including battery) - Battery: 1 x CR2032
Minoura Training Accessories like the ANT+ Minoura Speed/Cadence sensor (SPD/CD Separate type) are a fantastic complement to your favorite trainer or roller. - Pickup and transmit the speed and cadence data - Separate type - Low energy ANT+ wireless protocol - Minoura is an official ANT+ Alliance Member - Universal on every ANT+ device
The Internal Chain Actuated Cone Cup is designed to work with chain actuated internal rear hubs, including Sturmey Archer. It also works perfectly with pre-2018 Brompton folding bicycles.
If you're really serious about your trainer sessions, check out Kurt Kinetic's Pro Flywheel. It attaches quickly and easily to your Road Machine or Rock and Roll flywheel (sold separately) for a total of 18 pounds. It takes your Kurt Kinetic trainer's already stellar real-road feel and ups the realism, which is a must for hard-core endurance workouts, like tempo and long distance rides. You'll also experience longer wind-ups when doing sprint intervals and a longer coast-downs.
This cone cup replaces the threaded cone cup on pre-2013 Rock and Roll trainers and is the mounting solution for carbon Trek Speed Concept frames that require a smaller cone cup on the drive side of the trainer than the pre-installed version. - Only compatible with the Rock and Roll trainer - This cone cup's smaller outside diameter fits makes it compatible with carbon Trek Speed Concept bikes (aluminum Speed Concept bikes are compatible with the Standard Cone Cup) - Use this cone cup on the drive-side of the Rock And Roll trainer (it is not necessary to replace both cone cups)
Page 1 of 1