Parts

- Machined aluminum ends with 50mm steel bolt

Small parts for TRP hydraulic disc brake systems.

BB-UN26 cartridge bottom bracket. - Smooth rotation - Square taper spindle - Sealed cartridge bearing assembly

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

Shimano, SM-MA-F203P/P, Disc brake adapter for Post Mount caliper, Front, Post Mount fork, 203mm rotor

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift all of gears at once. These shifters are indexed to shift three front chainrings, and feature micro-adjustments to keep derailleur alignment perfect.

SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

SRAM's PC-1 Single Speed Nickel Chain is designed for singlespeed bicycles so it won't jump off when you're laying down the power. It comes with a connector link for easy installation and removal.

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 1 Threaded Hose Barbs & 1 Compression Fittings - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

- Length: 8 mm, 5.5 mm - Material: Steel - Type: Hex - Set of 4 x 2

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with Shimano I-Spec EV (M9100, M8100, M7100) brake mounts. - Does not contain remote body.

Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with Shimano I-SPEC-II brakes - Not Compatible with Shimano I-SPEC-A or B - Does not contain remote body.

- High performance compounds recommended for all-conditions - Steel backing

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

- 4mm compressionless housing - Slick-Lube liner (SL) - Housing length: 50m

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Road Pro Inserts are a nice upgrade for Shimano and SRAM sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims.

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation