Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Wheels

CycleOps Trainer Skewer
$17.59
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Profile Design 58/TwentyFour Full Carbon Front Wheel (Clincher)
$974.99
Races, training, group rides, gran fondos—Profile’s 58/Twenty Four Full Carbon Clinchers will be your new secret weapon. Their engineers used fluid dynamic modeling and wind tunnel testing to create a super slippery 58mm-deep by 24.5mm-wide rim for maximum free speed and slicing right through head and cross winds. Adding mph are the Sapim CX-Ray bladed spokes, which have locking nipples so they stay tight. These wing-like wheels save you massive energy on the flats and they're also light enough to rocket you up the climbs. Plus, Profile's careful hand assembly and advanced carbon layup mean rock-solid stiffness for outstanding power transfer. And, because sometimes you just have to hit the brakes, Profile includes high-tech carbon wrapping and a heat-resistant resin in its rims, plus carbon-compatible brake pads come with the wheels so you'll have more stopping power than ever. Upgrade to the 58/Twenty Fours and get ready to become a better rider.
Zipp 303 Firecrest Carbon Rear Wheel (Clincher)
$1,535.99
Zipp makes the impossible possible with their Firecrest 303s—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind with more efficiency than many deep-section wheels thanks to their 28.5mm-wide dimpled rims. By creating a seamless junction between rim and tire, the increased width results in less drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scales, which makes them a must-have on undulating terrain. The extra wide rim also allows you to run wider tires at a lower pressure with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Zipp’s stiff hubs and Sapim CX-Ray spokes provide the finishing touches.
Zipp 303 Firecrest Rear Wheel Disc Brake (Clincher)
$1,535.99
Zipp's Firecrest 303s give you the speed to take the hole shot and the control to maintain it. Built on ultra rigid 45mm-deep carbon rims, they slice through the mud, sand, and wind with predatory force, always hungry for the win. At 28.5mm-wide, the rims offer an extra-wide platform so you can run lower tire pressures for diminished rolling resistance and better grip in the corners, all without the fear of flatting. Disc-compatibility reigns in an era of smooth, dialed braking control, which translates to more speed and less wasted energy. Zipp’s stiff hubs and Sapim CX-Ray spokes provide the finishing touches.
Zipp 303 Firecrest Front Wheel Disc Brake (Tubular)
$1,214.99
Zipp's Firecrest 303s give you the speed to take the hole shot and the control to maintain it. Built on ultra rigid 45mm-deep carbon rims, they slice through the mud, sand, and wind with predatory force, always hungry for the win. At 28.5mm-wide, the rims provide an extra-wide platform so you can run lower tire pressures for diminished rolling resistance and better grip in the corners, all without the fear of flatting. Disc-compatibility reigns in an era of smooth, dialed braking control, which translates to more speed and less wasted energy. Zipp’s stiff hubs and Sapim CX-Ray spokes provide the finishing touches.
Zipp 303 Firecrest Rear Wheel Disc Brake (Tubular)
$1,499.99
Zipp's Firecrest 303s give you the speed to take the hole shot and the control to maintain it. Built on ultra rigid 45mm-deep carbon rims, they slice through the mud, sand, and wind with predatory force, always hungry for the win. At 28.5mm-wide, the rims offer an extra-wide platform so you can run lower tire pressures for diminished rolling resistance and better grip in the corners, all without the fear of flatting. Disc-compatibility reigns in an era of smooth, dialed braking control, which translates to more speed and less wasted energy. Zipp’s stiff hubs and Sapim CX-Ray spokes provide the finishing touches.
Stan's NoTubes Standard Rim Strip
$37.99
Stan's Standard Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Valor Team 29 Rear Wheels
$1,229.99
Lighter and stronger than aluminum rims, the Valor’s carbon lay-up is engineered to absorb radial vibrations and impacts through a construction that is both elastic and strong. Stan's NoTubes has constructed a lightweight carbon fiber rim design not just to be stronger than aluminum, but also to perform better in real world riding conditions. Valor wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for cross country racing and riding - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Laser 1.8/1.5/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider tires / 2.00 - 2.25 - 2-year warranty with 3-year crash replacement
Stan's NoTubes Valor Pro 29 Rear Wheels
$1,499.99
Lighter and stronger than aluminum rims, the Valor’s carbon lay-up is engineered to absorb radial vibrations and impacts through a construction that is both elastic and strong. Stan's NoTubes has constructed a lightweight carbon fiber rim design not just to be stronger than aluminum, but also to perform better in real world riding conditions. Valor wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for cross country racing and riding - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Laser 1.8/1.5/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider tires / 2.00 - 2.25 - 2-year warranty with 3-year crash replacement
Spank Spike EVO Race 28 Enduro Rim (27.5-inch)
$132.99
Enduro rims need to be light enough to make it up the climbs, and tough enough to handle full-on zesty descending on the way back down. Luckily, Spank's Spike EVO Race 28 Enduro rims have you covered. • MGR Dynamal aluminum alloy • Disc specific rim • Tubeless Ready • 28-hole
Stan's NoTubes 3.30RD/3.30RDTi 12x142mm Thru-Axle Conversion Kit
$54.99
Converts a Stan's 3.30RD/3.30RDTi hub to a 12x142mm thru-axle.
Stan's NoTubes 3.30/3.30Ti Rear QR Caps (Type 2 Axle)
$34.99
Replacement end caps for Stan's NoTubes ZTR/3.30/3.30 Ti rear hub. They're compatible with a Type 2 hub.
WTB Asym TCS Rim 29-inch
$109.99
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
Stan's NoTubes Rim Tape
$22.00 - $39.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30HD Hubs)
$163.99
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes 3.30HD wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Stan's NoTubes 3.30/3.30Ti Shimano/SRAM Steel Freehub Body (9/10-speed)
$149.99
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30 disc or HD disc rear hubs.
DT Swiss 240s MTB 6-Bolt Front Hub
$370.99
The DT Swiss 240s MTB 6-Bolt Front Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
MICHELIN Country Race'R
$29.99
MICHELIN's Country Race'R is the perfect choice for hardpack surfaces and fast courses. It has shorter knobs in the center so it rolls fast, taller knobs on the sides that great grip in the corners and it's built for excellent durability and puncture resistance too.
DT Swiss BR 2250 Classic
$599.99 - $839.99
Big tires and wide rims normally mean heavy wheels. But not with DT's BR 2250s! Nearly as light as standard wheels and with the footprint only fatties can offer, this wheelset turns any fat bike into a fun-machine!
DT Swiss Prolock Hexhead Alloy Nipples
$106.99
- ProLock: pre-prepped/treated nipple threads with special compound - Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion - Form-A design assures smooth fit and build - Cold-forged nipple blank machined to DIN 79012 specs - 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple) - 2.0mm (14g) spoke thread interface with full run-through - Made in Switzerland. - Box/100
SRAM MTH 716 Front Hub
$106.99 - $112.99
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.
SRAM 900 Front Hub
$112.99
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
WTB TCS Rim Tape
$28.99 - $35.99
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Kurt Kinetic Trainers Skewer
$14.99
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Wheels Manufacturing Inc. CN-R002 Cone
$13.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Rear Left Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 15mm - 1 cone per bag - Note: O-ring / seal not included. Check the seal groove closely. This cone has a wider groove than cone CN-R024. COMPATIBLE HUBS: - Ultegra 6401 7-speed Rear - Ultegra 6402 8-speed Rear - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Wheels Manufacturing Inc. CN-R083 Cone
$13.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R084 Cone
$13.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech 9mm x 26, front hub - Compatible with 9mm x 26 axle - Cone Wrench Size: 13mm - Threads: 9mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Joytech 9mm x 26, front hub - Taiwanese hubs with 9mm x 26 axle - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Wheels Manufacturing Inc. CN-R085 Cone
$13.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26 - Diameter: 17.0mm - Length: 13.8mm - Note: O-ring / seal not included. - 1 cone per bag COMPATIBLE HUBS: - JoyTech 10mm x 26, rear hub - Taiwanese hubs with 10mm x 26 axle
Wheels Manufacturing Inc. CN-R086 Cone
$13.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9mm x 1, front "parallax" style hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 11.0mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech 9mm x 1, front "parallax" style hub - Taiwanese hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R088 Cone
$13.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Compatible with 9.5mm x 26tpi axle - Cone Wrench Size: 13mm - Threads: 9.5mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Taiwanese hubs with 9.5mm x 26tpi axle
Page 1 of 18 Next page