Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Cranksets

Wheels Manufacturing Inc. Freewheel/BB Spacer
$25.99
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Wheels Manufacturing Inc. PF30 Adapter for 22/24mm Spindle Cranks
$55.99
Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Wheels Manufacturing Inc. PF30 Adapter for 24mm Spindle Cranks
$39.99
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Wheels Manufacturing Inc. PF30 Adapter for Campagnolo Cranks
$70.99
The Wheels Manufacturing PressFit 30 Bottom Bracket Adapter for Campagnolo Ultra-Torque Cranks adapts Campagnolo Ultra-Torque cranks to PF30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr NOote: - PF30-CAMP was originally designed for use with SRAM PF30 bottom brackets with 6806 bearings installed. They will not work with newer SRAM PF30 bottom brackets that use a plastic insert that fits into the bearings and covers the outside of the bearings. - Will not work with Wheels Manufacturing PF30 Bottom Brackets.
TruVativ 2X10 X-Guide
$170.00
For chain consistency and control in technical situations, TruVativ teamed up with chain guide masters MRP to bring you the 2X10 X-Guide. It features an aluminum back plate and MRP's replaceable Skid Plate design so its amazingly lightweight, yet can take a beating. The lower guide, along with a sealed bearing pulley provides excellent chain retention in the roughest terrain.
TruVativ BMX To Threaded (BSA) BB Adapter
$27.99
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
TruVativ Descendant 7K DUB Direct Mount Crankset
$199.99
The Descendant 7K crankset delivers consistent performance every ride. Featuring SRAM's X-SYNC2 tooth profile chainring, the Descendant crankset is engineered for complete chain control. Each tooth's thickness is precisely toleranced and controlled to work seamlessly with SRAM chain's inner and outer links. SRAM DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of durability. - The Descendant 7K crankset is compatible with the SRAM Eagle drivetrain system - Featuring SRAM’s X-SYNC2 tooth profile - Optimized 7000 series forged aluminum arms - SRAM DUB technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatible - Direct Mount ring - ISO 4210 compliant - 12-Speed, 56.5mm chainline - DUB bottom bracket sold separately
TruVativ Descendant Carbon DUB Boost Crankset
$371.00
The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon construction for lightweight durability - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs
TruVativ Descendant Carbon DUB Crankset
$371.99
The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon construction for lightweight durability - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs
TruVativ Descendant Downhill Crankset
$234.99
Born From The Mountain Whether your target is high speed or big air, an unwavering focus on dependability and style can never be overlooked. Blending the experience of countless DH podiums, big mountain competitions, and film sessions, the new Descendant DH crank brings clock-beating weight savings to freeride burliness—at a price that will leave money for the next adventure. Meet your gravity goals—Descendant. Features - Lightweight DH crankset - New graphics - World Cup proven design - Fully compatible with any 1x drivetrain - X-SYNC chainring Specifications: - Speeds: 10/11 - BB Compatibility: DUB BSA MTB83, DUB PF MTB104.5/107 - Chainring Size: 34 - Crank Arm Length: 165mm, 170mm - Chainline: 56.5mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank Arm Material: Aluminum
TruVativ Descendant Troy Lee Designs CoLab Crankset
$643.00
Performance Creativity For the aficionados and the geeks and the fanboys and the freaks, a custom-painted crank is a place of pride. A painted hammer. A beautiful ax. Troy Lee and his team channeled the future of camo to design these cranks, and the future in the stiff, durable world of SRAM cranks is looking exceptionally bright. Specifications: - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Chainring Size: 32 - Crank Arm Length: 165mm, 170mm, 175mm - Chainline: 52.0mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD: Direct Mount (DM) - Crank Arm Material: Carbon
TruVativ Descendant Troy Lee Designs CoLab Downhill Crankset
$643.00
Same Same. But Different. For the artist, the challenge of the solution is the inspiration to create. The crank arm—perfected in performance by SRAM engineers—is a utilitarian canvas begging to be transformed. Troy Lee, design artist, took to that canvas and now, those of us who have seen, can never unsee. It's the crank, made more. Same same. But forever different. Specifications: - Speeds: 10/11, 11/12 - BB Compatibility: DUB BSA MTB83, DUB PF MTB104.5/107, DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Chainring Size: 32, 36 - Crank Arm Length: 165mm, 170mm - Chainline: 49.0mm, 56.5mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank Arm Material: Carbon
TruVativ Stylo Carbon Eagle DUB Crankset
$371.00
The STYLO Carbon DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs
TruVativ X0 Chain Guide
$208.99
For chain consistency and control in technical situations, TruVativ teamed up with chain guide masters MRP to bring you the XO Chain Guide. It features an aluminum back plate and MRP's replaceable Skid Plate design so its amazingly lightweight, yet can take a beating. The combination of the upper and lower guides, along with a sealed bearing pulley provides excellent chain retention in the roughest terrain.
Stages Cycling Gen 3 Stages Power L Cannondale Si HG Power Meter
$549.99
The new Gen 3 single-sided Stages Power L meter for Cannondale Si Stages Power meter is built on to a non-drive-side Cannondale Si crank arm and is compatible with existing Cannondale Hollowgram Si crank models - 2014 or newer and Hollowgram SiSL2 cranks. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Stages Cycling Gen 3 Stages Power L Dura-Ace R9100 Power Meter
$699.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace R9100 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Stages Cycling Gen 3 Stages Power L Ultegra 8000 Power Meter
$549.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Ultegra R8000 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5% accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 - Sizing Options: - Lengths: 165mm, 170mm, 172.5mm, 175mm Includes: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Stages Cycling Gen 3 Stages Power LR Shimano Dura-Ace R9100 Dual Sided Power Meter
$1,559.99
The new Gen 3 Stages Power meter is built onto a Shimano Dura-Ace R9100 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelorometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 5000 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Specialized S-Works Carbon Spider
$210.00
This very light, stiff, and strong carbon crank spider optimizes your power transfer. - Stiff and lightweight. - For use with S-Works carbon road cranks.
Specialized S-Works Power Cranks - Dual-Sided
$1,600.00
No matter your skill level or experience on the bike, there's no better way to enhance your training and racing performance than by riding with a power meter. Lucky for you, Specialized has combined their incredibly light and stiff carbon fiber S-Works road cranks with dual-sided power measurement, making it the lightest (440g/172.5mm) and most accurate power meter available. The development of Power Cranks began with Specialized's Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, they found that neither of these methods answer the "real-world" accuracy question. To get the best test for accuracy, in all types of riding scenarios, Specialized built their own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets them evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is their gold-standard for testing power meters, and through their testing and external validation from the Locomotion lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real world scenarios (+/- 1.5%). The Dual-Sided S-Works Power Cranks utilize separate strain gauge systems to individually measure the effort produced by each leg. This maximizes the accuracy of your total power numbers, plus it helps you to better understand your performance as fatigue increases and when you're recovering from injury. And with class-leading temperature compensation firmware and waterproof enclosures, Power Cranks are easy to live with. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/-1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Independent, dual-leg power measurement. - Works with ANT+ and Bluetooth devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Hollow carbon crankarms, carbon spider, and oversized alloy spindle offer superior stiffness and lighter weight than the competition—440 grams for 172.5mm crankarm length. - Fits Specialized road frames with OSBB or PF30 bottom bracket shell, as well as most BB30 road frames. - 110 BCD carbon spider (also compatible with 130 BCD carbon spider—sold separately). - Compatible with Shimano and SRAM drivetrains. Chainrings are sold separately. Use only with Specialized/Praxis chainrings 06217-1702 (52/36T) and 06218-1713 (50/34T). - Available in 165-180mm crankarm lengths.
Shimano 105 5800 Left Hand Crank Arm
$114.99
- Crank Construction : HOLLOWTECH II - Optimum power transfer
Shimano 105 R7000 Crankset
$239.99
The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD
Shimano Alfine S501 Crankset
$144.99
This 2-piece crankset with chain guard is perfect for city and commuter bikes. - Chainring: 45T, 42T, 39T - Single or double chainguard integrated design - Chain compatibility: Super Narrow HG for 9-speed, HG 8-speed (1/2 inch x 3/32 inch)
Shimano Crank Bolts
$32.49
- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles
Shimano Deore XT Crank (Double)
$309.99 - $314.99
- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arms : HOLLOWTECH II Technology - Bottom Bracket : BB-MT800 / BB-MT800-PA - Chain Line : 48.8mm - BB Shell Width : 68, 73mm
Shimano Deore XT Crank (Triple)
$329.99
- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-3 - Series : DEORE XT - Crank Construction : HOLLOWTECH II Technology - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Chain Line : 50mm - BB Shell Width : 68, 73mm
Shimano Deore XT Crank Arms
$199.99 - $298.99
- Aluminum crank arm and spider with steel spindle - 4 bolt spider compatible with all XT 8000 series chainring configurations - Hollowtech II crank arm construction - Steel driving gear teeth and aluminum support gears - 96mm P.C.D. - 176 Q-Factor, 53.4mm OR 50mm chainline - BB Included: No - Chainrings Included: No
Shimano Deore XT FC-M8120 Crankset
$309.99
The Shimano Deore XT FC-M8120 crankset features modern construction using direct mount chainrings and a 178mm Q-factor for 12-speed MTB drivetrains. - Hollow forged crank maximizes power transfer while limiting weight - Rigid and lightweight design for aggressive trail riding - Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight and rotating performance. - 178mm Q-factor - 51.8mm chainline - Exchangeable single/double chainring - Number of Chainrings: Double - Chainline/Hub Compatibility: 141/148 Boost Hubs - Spindle Interface Type: Shimano Hollowtech II - Chainring BCD: Direct Mount - Pedal Spindle: 9/16" - Crank Intended Use: Mountain - Crank Length: 175mm - Rings: 36/26 - Drivetrain Speeds: 12 - BB Included: No
Shimano Deore XT Hollowtech II Boost Crankset
$314.99
Ride anywhere 11-speed rider tuned gearing. The power to choose how and where you ride. Consistent shifting performance and enhanced chain management. Optimal balance of durability and lightweight. High efficient and precise shifting. These cranks are Boost compatible. - Enhanced chain retention. - Better sealing and better rotation. - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - 4-Arm Chainrings : x - Chainring Sizes : 38-28T, 36-26T, 34-24T - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arm Length : 170mm/175mm - Chain Line : 51.8mm - BB Shell Width : 68, 73mm
Shimano Deore XT M8000 Left Crank Arm
$144.99
Shimano XT Left Crank Arm - Spindle Interface Type: Hollowtech II