Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$94.99 $95.00 On Sale
e*thirteen Press Fit Bottom Brackets - Adapts all e-thirteen and older Fifteen.G cranks to BB89.5 BB92 frames - Custom angular contact bearings TiNi models feature Ti Nitride races - EV-8015 includes chainline spacer kit for LG1 and non-APS cranks - e*thirteen's BB92 bottom bracket uses industry-exclusive dual-row bearings to fit big performance into a small BB shell - A center tube helps seal the BB shell - For 41mm ID pressfit frames - Bearings feature high-performance seals, and a custom grease specification delivers supreme durability and smooth spinning performance
$84.99 $85.00 On Sale
Lighter, stronger, and better looking than our original Guiderings; the Guidering SL is intended for use on TRS, LG1, and legacy e*thirteen cranks. The Guidering SL is -8mm offset. This offset will achieve both boost (52mm) and non-boost (49mm) spacing on e*thirteen cranks that feature adjustable chainline (2019 and newer TRS & LG1). On legacy and XCX cranks the Guidering SL will achieve a 49mm non-boost chainline. - Direct Mount chainring for TRS and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Allows both Boost 148mm and non-boost 142mm chainline on adjustable TRS and LG1 cranks SL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings.
$47.00
Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.
$103.00 - $126.00
Featuring the proprietary mud clearing Drop-Stop tooth design, these rings are designed to fit any 104 BCD crankset. Made in Minneapolis, MN with exceptional chain retention in mind, these chainrings are best paired with a clutch-style rear derailleur. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life
$109.99 $110.00 On Sale
"The perfect solution when you need something smaller than a 30t on your 104/64 BCD cranks or your 11-speed Shimano XT and SLX 96/64 BCD cranks. Also, they look great when paired with our 104 BCD bash ring on a 104/64 BCD crankset - Fits any 104/64 BCD crankset (104 BCD is the middle/big position 64 is the smallest ring position) - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility - Fits any 104/64 BCD crankset (104 BCD is the middle/big position 64 is the smallest ring position) - The Universal Model fits both 104/64 BCD cranksets and the Shimano 11 speed XT M8000 cranks and SLX M7000 cranks. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline (approximate as BB centering and cranksets vary) - Chainline is 46mm on a triple and 48mm on a double crank - Chainline on a Standard M8000 or M7000 crankset is 48mm and 50mm on a boost version - You will use the stock bolts to mount to this chainring - Use Drop-Stop A for all 9, 10, 11 spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Wihtout these precautions, you may experience chaindrops and/or chainsuck"
$125.00
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains. Compatibility - Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect) - Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring. - Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring. - Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available. - Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission. - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) --- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost) - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$25.00
- Cartridge steel bearings - ABEC 5 rating - Sold as 1 unit
$172.99 - $198.00
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g
$75.10
Wheels Mfg original BB86/92 bottom bracket is a significant upgrade to any OEM BB86 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 114g
$84.99 - $103.99
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 161g
$237.00
PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 115g
$13.99 $14.00 On Sale
- Machined aluminum ends with 50mm steel bolt
$31.99 $32.00 On Sale
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$5.90 $6.00 2% Off
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$34.99 $35.00 On Sale
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$31.99 $32.00 On Sale
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$39.99 $40.00 On Sale
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$50.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$55.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$22.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$46.60
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$106.99 $107.00 On Sale
- Designed for for Specialized 24/36T Crankset - Drivetrain Speeds: 2 x 10 - 104mm BCD
$79.99 $80.00 On Sale
TruVativ's Howitzer Team Bottom Bracket is THE workhorse built for abuse. Sealed, oversize cartridge bearings are used to provide smooth action and extreme durability. For serious downhill-worthy strength, the Howitzer boasts CNC-machined aluminum cups and a chromoly spindle, too.
$24.99 - $38.00 $35.00 - $38.00 Up to 34% Off
TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included
$34.00 - $109.99 $34.00 - $109.99 On Sale
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum
$48.00
Genuine replacement parts Prowheel: Crank it up! Shift smooth, use matching chainrings. - Bosch Generation 3 specific e-bike narrow wide chainring - Aluminum spider and steel chainring -104mm BCD
$55.99 $56.00 On Sale
Get back on the road with a genuine replacement crankset. Genuine replacement parts Keep your bike operating as it should. - Adjustable arm length from 120mm to 140mm - Hardware included
$33.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals. - Included with mountain pedal models numbered "2" and "4." - Release angle of 10 degrees and is compatible with all two-hole cycling shoes. - Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.
$120.00
- Large platform and an easy-entry system, make it perfect for everyday use. - Cleat engagement is easy and positive in every condition and for every skill level. - Hollow steel axle makes the pedal lightweight yet durable, while the open design keeps you riding with ease, clearing mud and debris every time you clip in. - Pedal Material: Composite - Pedal Weight: 192g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''
$29.00
- Dual pivot caliper brake - Melt forged aluminum arms - Quick release mechanism - Dimension : 39-52mm - Designed for 28C tire
$14.00
Small parts for TRP hydraulic disc brake systems.
$33.00
Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: Shimano: - XTR BR-M9120 - XT BR-M8020 - SAINT BR-M820,BR-M810 - ZEE BR-M640 - BR-MT520 TRP: - Quadiem - Quadiem SL - Slate T4 - Tektro - HD-M750 - HD-M745 - HD-M735 - HD-E725
$59.99 $60.00 On Sale
Our best-selling Super Sticky Kush tuned and tailored to the specific needs of gravel. Plush 3.2mm of thickness for extra shock absorption and control. Each roll is extra long to give you the freedom to wrap any way you want. - Tackiest/Best Hand Feel - Long Lasting PU Tape - Laser Etched Aluminum Bar Plugs - High-End Rubberized Finishing Tape - Material: PU Length: 2200mm Width: 30mm Thickness: 3.2mm
$56.99 - $57.00
Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. Classic collection celebrates cycling with the most recognized colors. - Super Sticky PU (top layer): Superior hand feel with long lasting performance. Extremely tacky advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. Embossed with the sacred geometric Supacaz pattern that maximizes grip and tackiness. - Kush Foam (middle layer): Exclusive compound that maximizes the Kush feel from the thinnest amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Tackiest/best hand feel - Long-lasting PU tape - Laser-etched aluminum bar plugs - High-end rubberized finishing tape - Material: PU - Length: 2160mm - Width: 30mm - Thickness: 3mm
$56.00
- 9 speed wide range - 11-40t - Steel spider
$130.00 - $167.99
- 11 speed wide range cassette - 7075 Aluminum largest sprocket - Alloy spiders, spacers and lockring - Fits Shimano/SRAM freehub - 465g (11-46); 401g (11-42); 389g (11-40)
$129.99 - $131.99 $129.99 - $132.00 On Sale
The Sunrace MX3 10 speed cassette is a cost effective upgrade or replacement cassette. - Alloy spiders, lockring and spacers - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Drivetrain Speeds: 10
$70.00
- Adjustable chain stabilizer - Alloy cage and links - Max rear sprocket is 50t with 1X setup & 46t with 2X - 9 speed compatible
$30.00 $35.00 14% Off
Specialized's BG Bar Phat w/Tape is a complete system that boasts advanced cushioning to keep you comfortable and protect your hands. It's comprised of adhesive gel pads and suede tape that's wrapped over them to provide the ultimate in comfort and control. In fact, tests have shown that the 4.5mm-thick pads reduce pressure by 50%!
$75.00
The Body Geometry Comfort Gel is ergonomically designed and scientifically tested to provide unmatched comfort and support while reducing pressure on soft tissue. - Plush foam combined with gel inserts delivers unmatched comfort. - Anatomically designed Body Geometry groove improves blood flow and comfort. - Vacuum formed construction creates a durable and waterproof saddle. - Level 5 padding: Ideal for commuting and casual riding - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$40.00
All new external varus wedge fits between the cleat and the sole of your shoe for the perfect hip, knee and foot alignment. - External varus/valgus cleat wedge - Provides one-degree of varus/valgus correction - Shaped to fit SPD-SL, Look Keo and Speedplay - Package includes eight wedges
$140.00 - $160.00
The Bridge Comp with Mimic technology is the perfect saddle choice for both on- and off-road riding. The broad, flat profile provides added control, while the Level 3 padding adds exceptional sitbone comfort. The center channel equipped with our patented, award-winning MIMIC technology perfectly adapts to your body to give you the support and comfort you need. This Comp version is equipped with light, durable Cr-Mo rails, as well as an even softer density, Level 3 padding for extra comfort. - Durable hollow Cr-Mo rails. - Innovative MIMIC technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Level 3 padding: Low/Medium density foam provides the perfect blend of bike feel and cushioning. - Lightweight and durable carbon-reinforced shell. - Patented Body Geometry design is lab-tested for both men and women to assure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$50.00
The Bridge Sport is the perfect saddle choice for both on- and off-road expeditions. The broad, flat profile allows for added control, while the patented Body Geometry channel is optimized to assure proper blood flow to sensitive arteries. - Patented Body Geometry design is lab-tested to assure blood flow to sensitive arteries - Lightweight and supportive PU foam for increased comfort on longer rides. - Lightweight and super-durable steel rails. - Level 3 padding: Extra padding for increased vibration dampening. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions
$36.99 - $72.50 $70.00 - $72.50 Up to 47% Off
Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.
$75.00
Specialized's Expedition Gel Saddle is a comfortable addition to any fitness, commuter, or cruiser bike. It boasts a supportive, ergonomic Body Geometry design, rear springs and plenty of gel padding.
$80.00
3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration. - 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem. - Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths. - Compatible with the Specialized accessory mount.
$70.00 - $100.00 $80.00 - $100.00 Up to 13% Off
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Expert Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. - 15mm rise for additional rider fit range. - Constructed from 2014 Premium Butted Aluminum for a high-strength design. - Shallow Bend Drop: 123mm drop x 75mm reach
$140.00 - $160.00
The Specialized Phenom Comp is a mountain bike saddle that's designed for comfort and strength over long days on the trail. It features a carbon-reinforced construction, Cr-Mo rails, and SWAT mounts for the utmost in utility. - Patented Body Geometry Design is lab tested to assure blood flow to sensitive arteries. - Carbon-reinforced shell with flexible Adaptive Edge technology adapts to your body for a custom fit and all-day comfort. - Low friction panels on the nose and tail improve pedaling efficiency and mobility while moving ‘on and off’ the saddle. - Light and super-durable, hollow Cr-Mo rails. - Lightweight and supportive PU foam for increased comfort on longer rides. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 254g - Size 155mm / Weight 260g
$220.00
The Phenom Expert is a mountain bike saddle that's designed for comfort and strength over long days on the trail. It features a carbon-reinforced construction at the shell, along with Specialized's Adaptive Edge base that allows the outer edge to conform to your body for a near-custom fit. This version, unlike the Pro, has rugged titanium rails for lightweight durability, and like the Pro, it has a medium density, Level Two Padding for ample support and comfort. Likewise, at the tail, you'll find the Phenom hallmarks of a rounded, anti-snag design, and throughout the saddle, an expertly tuned construction that provides the ideal degree of both stiffness and efficiency. - Patented Body Geometry Design is lab tested to assure blood flow to sensitive arteries. - Carbon-reinforced shell with flexible Adaptive Edge technology adapts to your body for a custom fit and all-day comfort. - Low friction panels on the nose and tail improve pedaling efficiency and mobility while moving ‘on and off’ the saddle. - Lightweight and tough, hollow titanium rails. - Lightweight and supportive PU foam for increased comfort on longer rides. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 248g - Size 155mm / Weight 254g
$140.00 - $160.00
For as long as there've been saddles, women have been having issues with them. But, where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And, when you combine this technology with the long-nosed, flat profile of the Phenom Comp saddle, with its hollow Cr-Mo rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Level II padding: Medium density foam for bike feel with additional cushioning. - Light, durable, and hollow Cr-Mo rails. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$140.00
Specialized's lightweight Power Comp saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. • Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries • Stiff, carbon-reinforced shell for longevity and all-day riding efficiency • Lightweight and supportive PU padding for comfort and support on longer rides • Lightweight and super-durable hollow Cr-Mo rails • Tough, light and water resistant cover • Level 2 padding: Medium density foam; bike feel with additional cushioning • SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions
$30.00
Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminum for durability, with threaded inserts to bolt the stays directly into the seat clamp. - 35mm inner diameter fits all alloy Specialized MTB frame designs with 30.9mm posts and 35mm O.D. seat tubes. - 37mm inner diameter fits all carbon Specialized MTB frame designs with 30.9mm posts and 37mm O.D. seat tubes.
$65.00
Connects the Specialized SL Range Extender Battery with all of our Turbo SL off-road bikes. - Custom connector with lock-mechanism ensures a secure connection. - Length: 160mm
$40.00
Gain new braking options on your road or cross bars without giving up hand positions. Specialized's Top Mount Brake Levers are a great way to gain more control on technical cyclocross courses and also provide a more upright position on road bikes.
$105.00
Specialized Turbo Road Remote
$140.00
For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. We spent countless hours performing research and prototyping in order to give you the comfort that you've been rightfully longing for. With our patented design, Mimic technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with our Power Comp saddle, with its hollow Cr-Mo rails and level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Light, durable, and hollow Cr-Mo rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Weight: 220g
$160.00
For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with the long-nosed, curved profile of the Romin Evo Comp saddle, with its hollow Cr-Mo rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Light, durable, and hollow Cr-Mo rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$140.00 $150.00 7% Off
Light, supportive and comfortable, Specialized's Women's Ruby Expert Saddle is a great upgrade for your bike. It features a carbon-reinforced shell with an Adaptive Edge base, a women's-specific shape and Specialized's Body Geometry technology for premium ergonomics and maximum comfort. It also boasts ultra-light foam padding and hollow-titanium rails to keep the weight down. What's more, the Ruby is available in three widths so you can get a perfect fit.
Page 1 of 59 Next page