Parts & Accessories

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

Fit Kit SET727 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle. This kit includes: - 15 x 135 mm thru axle with M15 x 1.5 mm thread pitch, with a spacer to reduce to 130mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Features - Required fender mounting bracket when installing the Rack-It Metro E rack to E-Bikes with fenders - Provides the needed support for the rear fender when upgrading to the Rack-It Metro E Rack

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

Fit Kit SET724.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.. This kit includes: - 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch - Spacers to reduce the length to 128 mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame If mounting on a Fox Gravel Fork, please also order 377-1240. We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

QuickClick mount for spring-style saddles. Works with all Topeak Wedge Bags. - Material: Injected nylon / Stainless steel - Weight: 50g / 1.76oz

For mounting rear lights on Topeak Tubular Rack, MTX BeamRack or any rack with 80 mm (center to center) mounting holes.

Fit Kit SET706.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle. This kit includes: - 12 x 125mm thru axle with 1.0 mm thread pitch, with spacer for 119mm spacing - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. - Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Benno Rack Pads affix to the Utility rack models with hook and loop fasteners creating a seating platform for passengers. - Use only with Benno High, or Half Rails, Wheel Guards. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes

Phone Pouch

Fit Kit SET810 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle. This kit includes: - 12 x 192—198mm thru axle with 1.75 mm thread pitch - Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes. - Pair of 14" extenders. Stabilize and level the rack. - A pair of OMM Pucks. Allows for an upper attachment point for the rack. - Stainless steel mounting hardware - Clear protective tape - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

The MIK Adapter Plate is an ideal accessory if you want to carry your essential items around quickly and easily. It will unlock your ability to customize your storage options on your rack. It’s compatible with removable bicycle accessories and suitable for luggage carrier racks for the MIK system or MIK carrier plate. The MIK Adapter Plate is a must-have for your Vado, Como, or Tero. - Attaches to a wide variety of accessories, including the Turbo Basket and various Basil accessories. - Connects securely to MIK and MIK HD racks or the MIK carrier plate (not included). - 15kg max. load when used on the MIK HD rack. - Allows for fast and tool-less installation and removal. - Includes MIK stick key for increased security.

- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend

Benno Rail Clamps are required to attach the Benno High, Half and Platform rails to the Utility Rack. - For Boost E 2020 and newer

The MIK Carrier Plate is ideal for cyclists who are looking to upgrade their frame to accommodate the MIK system. This carrier plate allows you to attach any accessory fitted with an MIK adapter to your luggage carrier in as little as one second. You’ve a wide range of accessories to consider, including panniers and baskets with ample storage. Once fitted with MIK system components, it’s as simple as clicking your preferred storage item or accessory into place. Please note, bikes already fitted with integrated MIK systems including carrier plate needn’t worry about upgrading their bicycle with this accessory. This MIK Carrier Plate is suitable for luggage racks with a width of 100-170mm. Features: - The MIK Carrier Plate is suitable for bicycle baskets and panniers from Basil. - Attach at the rear luggage carrier of conventional and electric bike frames. - The MIK Carrier Plate is designed for use with accessories that have been fitted with MIK Adapter Plates.

Axiom's Handlebar Rain Cover is a lightweight and packable solution for rainy days. It's made from seam-sealed, PVC-coated Nylon Oxford fabric and slips over your handlebar bag (sold separately) quickly and easily. The bright yellow cover enhances visibility too.

Adapter for mounting the Topeak MTX rear basket to any MTX QuickTrack compatible rack.

QR clamp for attaching DynaPack to seatpost. Includes adapters for different seatpost diameters.

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

With enough capacity for a 16g or 25g CO2 cartridge, tire lever and an inner tube, the all-new Clutch Frame Strap lets you carry the bare essentials for every ride easily and conveniently strapped directly onto your frame. Features: - 1" width easily fits quickly and easily anywhere on your frame - Heavy duty Bartack used on all shock cord stress points - Machine washable Specifications: - Fits 16g or 25g CO2 Cartridge x2, tire lever x2, inner tube - Sizes: 78 x 48 x 8mm - Colors: Black/Sliver - Weight: 118g - Material: Nylon fabric

Benno Rack Pads affix to the Utility rack models with hook and loop fasteners, creating a seating platform for passengers. - Use only with Benno High, or Half Rails, Wheel Guards. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

These are the zip ties included in with our Fit Kits - Special stainless steel metal tang on the zip tie provides high strength 120lb load rating. - UV resistant material for outdoor adventures. - Panduit # BT2LH-TL0

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 20-mm ORTLIEB hooks (cannot be used with inserts). DETAILS: - 2 QL2.1 snap hooks (20 mm) with adjustable handle

For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)