Parts & Accessories

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

These are the zip ties included in with our Fit Kits - Special stainless steel metal tang on the zip tie provides high strength 120lb load rating. - UV resistant material for outdoor adventures. - Panduit # BT2LH-TL0

Fit Kit SET706.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle. This kit includes: - 12 x 125mm thru axle with 1.0 mm thread pitch, with spacer for 119mm spacing - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. - Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET712.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle. This kit includes: - 12 x 122mm thru axle with 1.75 mm thread pitch - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET724.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.. This kit includes: - 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch - Spacers to reduce the length to 128 mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame If mounting on a Fox Gravel Fork, please also order 377-1240. We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET810 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle. This kit includes: - 12 x 192—198mm thru axle with 1.75 mm thread pitch - Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes. - Pair of 14" extenders. Stabilize and level the rack. - A pair of OMM Pucks. Allows for an upper attachment point for the rack. - Stainless steel mounting hardware - Clear protective tape - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET727 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle. This kit includes: - 15 x 135 mm thru axle with M15 x 1.5 mm thread pitch, with a spacer to reduce to 130mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET806 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your fat bike with a 12mm rear thru axle. This kit includes: - 12 x 209mm thru axle with 1.5 mm thread pitch - Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes. - Pair of 14" extenders. Stabilize and level the rack. - A pair of OMM Pucks. Allows for an upper attachment point for the rack. - Stainless steel mounting hardware - Clear protective tape - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm..

Fit Kit SET809 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 209mm thru axle with 1.75 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET807 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 217—229mm thru axle with 1.75 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)

The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz

Featuring composite construction, Lezyne's Caddy QR Mount provides a simple attachment to your seat rails. It's compatible with all Lezyne QR Caddys.

Features - Required fender mounting bracket when installing the Rack-It Metro E rack to E-Bikes with fenders - Provides the needed support for the rear fender when upgrading to the Rack-It Metro E Rack

With enough capacity for a 16g or 25g CO2 cartridge, tire lever and an inner tube, the all-new Clutch Frame Strap lets you carry the bare essentials for every ride easily and conveniently strapped directly onto your frame. Features: - 1" width easily fits quickly and easily anywhere on your frame - Heavy duty Bartack used on all shock cord stress points - Machine washable Specifications: - Fits 16g or 25g CO2 Cartridge x2, tire lever x2, inner tube - Sizes: 78 x 48 x 8mm - Colors: Black/Sliver - Weight: 118g - Material: Nylon fabric

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

Benno Rack Pads affix to the Utility rack models with hook and loop fasteners creating a seating platform for passengers. - Use only with Benno High, or Half Rails, Wheel Guards. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes

Benno Rail Clamps are required to attach the Benno High, Half and Platform rails to the Utility Rack. - For Boost E 2020 and newer

Benno Rack Pads affix to the Utility rack models with hook and loop fasteners, creating a seating platform for passengers. - Use only with Benno High, or Half Rails, Wheel Guards. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes

Benno Rail Clamps are required to attach the Benno High, Half and Platform rails to the Utility Rack. - For Boost E 2020 and newer

The Benno Half Rail Plus attaches to the platform rack providing stability for rack passengers. The half rail design provides easier access for ingress and egress. Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes.

The Benno High Rail rack add on extends the usefulness of the Utility Rack to provide additional stability for bulkier loads or older children. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes Compatible with: - Categories: Boost EVO 3, Boost EVO 2, Boost EVO 1, Carry On - NOT compatible with Boost EVO 4 and later!

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

The MIK Carrier Plate is ideal for cyclists who are looking to upgrade their frame to accommodate the MIK system. This carrier plate allows you to attach any accessory fitted with an MIK adapter to your luggage carrier in as little as one second. You’ve a wide range of accessories to consider, including panniers and baskets with ample storage. Once fitted with MIK system components, it’s as simple as clicking your preferred storage item or accessory into place. Please note, bikes already fitted with integrated MIK systems including carrier plate needn’t worry about upgrading their bicycle with this accessory. This MIK Carrier Plate is suitable for luggage racks with a width of 100-170mm. Features: - The MIK Carrier Plate is suitable for bicycle baskets and panniers from Basil. - Attach at the rear luggage carrier of conventional and electric bike frames. - The MIK Carrier Plate is designed for use with accessories that have been fitted with MIK Adapter Plates.

- The Basil Buddy Space Frame can be used in combination with the Basil Buddy Dog Bicycle Basket. - This wire dome is made from hard-wearing steel and prevents your dog from jumping free of their basket while you’re out riding. - This wire dome comes in classic black. - Provides complete protection for your dog and total peace of mind for pet owners when out cycling.

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum