Accessories

The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability

The EVOC BIKE TRAVEL BAG XL is the ideal transport case if more space is needed. This bike bag for Plus- and Fat Bikes is the mobile alternative for storage to a bike box with maximum protection for frame, wheels and other components, whether for bike shipping or flying. - Fits Plus- and Fat Bikes - Variable Frame Fixation Equipment (VAFFE) - Separate Wheel Compartments - Collapsible to: 143 x 41 x 28 cm - Maximum wheel base: 125 cm incl. handle bar- and fork protection block (130 cm without handle bar- and fork protection block) - Reinforced fork mount

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace R9100 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DZero DUB power meter is made for. Train harder, ride faster and unlock your ultimate potential.  - Specifically designed for use with XX SL Eagle T-Type Thread Mount chainrings (Sold separately) - AXS™™ enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED® and Force eTap AXS™™ cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48

- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations

Battery anxiety? Not with a Turbo SL. Our discreet and compact SL Range-Extender Battery provides up to 40 additional miles (64km) of mountain-flattening power. More range, more riding. - Only available for purchase at your local dealer. - 160Wh capacity delivers up to one additional hour of riding. - Compatible with Turbo SL Bikes. - Includes a 3 LED charge-level indicator. - SL Range Extender Cable 220mm ROAD 98920-5655 SOLD SEPARATELY. - SL Range Extender Cable 160mm MTB 98920-5650 SOLD SEPARATELY.

The new Gen 3 single-sided Stages Power R meter is built on to a drive-side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Single drive-side power meter increases frame compatibility or upgrades an existing Stages Power L meter to Stages Power LR. Stages Power R offers increased compatibility with direct mount brakes and frames that lack adequate chainstay clearance, as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR bi-lateral (dual) meter systems. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, 2x phillips head screw to access battery compartment - Weight: Only adds 20g to base crankset - Battery Life: 175+ hours (via coin cell: CR2032) - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Drive-side power meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

Turn your 66" trailer into a 78" trailer. Widen your 66" wheel track and Crossbars by 13" with this kit. With 78" Crossbars you can carry wider loads, such as two 36-inch beam canoes or up to seven kayaks. - Upgrade your RACKandROLL 66" trailer to a 78" trailer - Comes with two 78" Crossmembers and two 78" Yakima Crossbars Product Specs: - Weight: 17.31 lbs. - Limited One Year Warranty

Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.

- Fits most: Cross Country, All Mountain, Enduro, Freeride, Downhill Bikes up to 29“, Gravel, Road, and Triathlon Bikes - For safe transport of road bikes and triathlon bikes, you need the BIKE STAND PRO - Smooth running skate wheels (replaceable) - Molded Polycarbonate Bike Block - Dimensions 138x39x85 cm - Weight 8.6 kg / 19 lbs

Benno Utility Rear Rack #3 - Compatible With Carry-On, Boost EVO 1-3 (16-19).

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low-energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. Features - Bluetooth low-energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad - no cadence magnet required - 10K Temperature Compensation - Battery - CR2032, 200-hour battery life, change without tools - OmniCal - swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy - within 1.5%, measuring both legs

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

- IPX7 waterproof, anti-dust casing with a closed magnetic rechargeable design protects the PowerPro under all conditions - 107mm BCD: Power Halo works with chain ring BCD (Bolt Center Diameter)107mm - High-capacity lithium battery delivers up to 100 hours of riding on a single charge - Built-in magnetic connector makes recharging easy - Green and red LED indicators display connection status and battery status - Bluetooth Smart and ANT+ connection

Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube. • PCS-4-1 uses the 100-5C Adjustable Linkage Clamp. • Clamp rotates 360º and is adjustable in height up to 67” (170cm) • Adjusts quickly from 55" to 72" • Approximate weight 26 lbs (11.8 kg) NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.

Stages Gen 3 single-sided Power L meter is built onto a non-drive-side Shimano GRX RX-810 crank arm. It's compatible with all Shimano GRX Cranksets. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5% accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm 175mm Compatibility: - This Shimano GRX RX810 Stages Power meter is compatible with all Shimano GRX cranksets. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others

The Wahoo KICKR SNAP makes indoor training a "snap!" It's a convenient, easy to set-up wheel-on smart trainer with the realistic ride experience Wahoo smart trainers are known for. The SNAP's legendary flywheel features technology that creates the same resistance experienced when riding outdoors. Plus, no other indoor bike trainer has more software training options, including Zwift and Trainer Road. The KICKR SNAP includes LED lights for connection status, third party power meter support, and the power measurement is now accurate up to +/-3%. - Designed for consistent power measurement of up to 1500W and accuracy of +/- 3% so that you can monitor and adjust your intensity. - Visual confirmation that KICKR SNAP is powered, connected and transmitting via Bluetooth Smart and/or ANT+ - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR to be controlled from any FE-C enabled device or application. - SNAP's wheel-on design makes it easy to turn your road, mountain, or TT bike into a powerful indoor smart trainer. - Made from high strength carbon steel and featuring a wide stance, SNAP is designed to keep its feet firmly planted on the floor and your bike securely locked in so you can train with confidence. - When connected to your device, it automatically sets your resistance via your favorite app or software - The SNAP flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and Trainer Road. - Get vital cycling metrics on your indoor ride. - Low operating sound, so no shouting required! - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.

The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles—reliable control of applied torque to protect sensitive components—with a click-torque wrench in the unmistakable Wera design. It features a very robust design with high accuracy, along with easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values facilitates the safe setting of the desired torque values, while the robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached - 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) - Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes, and e-bikes - Easy setting and saving of the desired torque value with an audible and tactile click when the scale value is reached (click 1) - Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) - Precise to +/- 4%

Pedro's Tool Station includes 13 professional-quality Pedro's tools covering a wide array of common repairs and adjustments. Designed for public use, all tools are permanently tethered to the steel back panel with extra-long stainless steel cables. The tools are stored in our Burrito Tool Wrap with a protective weather-resistant flap. Three spare cables and crimp sets are included and can be used to add extra tools, a floor pump, or to facilitate replacement of tools if necessary. The Tool Station also features 4 mounting holes which are keyhole shaped to allow easy removal and re-installation if desired. Additionally, the central mounting holes are spaced to fit standard steel sign posts if a free-standing setup is preferred. - 6-Pack Chain Tool - Chain Tool and three-way spoke wrench (includes 2 Spare Pin/Screws) - Folding Hex Wrench Set - 1.5-6mm sizes - Pro T/L Hex Wrench - 8mm - Y Wrench-T10,T25,T30 sizes - Tire Levers - Yellow Pair - Pro Pedal Wrench - #2 Phillips Screwdriver - 5.5mm Flat Blade Screwdriver - Toothbrush - Drivetrain brush Chain Checker Plus - Chain wear check tool, chain hook tool, and chainring nut wrench - Adjustable Wrench-10" - Trixie - 8, 9, 10, 15mm Box, Bottle, Cog Lockring

Versatile and clever The Nyon is the perfect companion for embarking on your fully connected eBike experience. Nyon connects to your smartphone with the eBike Connect app and exchanges data about routes and activities. The color display serves as an intelligent guide when you are exploring new places and as your personal trainer by providing you with fitness data. The touch screen makes the all-in-one computer both intuitive and easy to use and is operated using the separate control unit during your ride. Whether you're using your eBike for long rides or short everyday trips, the robust, easy-to-read display ensures that you are ready for all requirements and weather conditions. The Nyon computer – for a smarter, more intuitive and connected generation. This is what Connected Biking feels like. Simple operation A convenient option: Nyon is intuitive to use thanks to the touch screen function and can be operated using the separate control unit during your ride. Award-winning design Impressive both inside and out: The 3.2-inch high-resolution color display combines smart functions with an elegant design that has won a Red Dot Design Award. Easy to read A clear view in any light: The display brightness and backlight automatically adapt to the ambient light. A special coating reduces glare and finger marks. You can choose between a dark and a bright display with maximum contrast. Individual screens Focus on the essential: You can customize the user interface of the display to suit your specific requirements. This gives you a clear view of the information that you need at all times. Always ready for action Whatever the weather: The touch screen of the robust display remains fully functional even when exposed to rain or dust and can be operated while wearing bike gloves. Savings Screen If you want to find out how much you could save by choosing to use your eBike instead of a car, check out the info on the new Savings Screen. This is activated in the screen management settings. You can also see a comparison of the current and previous weeks, or choose a different currency in the settings. Smart connectivity functions Perfectly connected: Nyon is part of an intelligently connected system and opens the door to the connected eBike World of Bosch thanks to the eBike Connect smartphone app and an online portal. Data synchronization Constant communication: As soon as Nyon connects to your smartphone or Wi-Fi, the computer connects to your eBike Connect account and automatically synchronizes the riding data. Choose your ideal position Optimum position: To ensure the best possible readability, the display mount has two installation positions. The center mounting position above the handlebar is designed to meet the needs of eMTB riders, while tour riders can place the mount further forward. One device, several users One for all: You can share your Nyon with friends or family – everyone can then synchronize their riding data with their own account. Software updates Always up-to-date: Software updates or new maps can be conveniently downloaded and installed over the air.

Now your favorite four-legged friend can come along for the ride. The Burley Tail Wagon® pet bike trailer is thoughtfully designed for easy loading and unloading, quick cleaning, and maximum comfort for your canine copilot.

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.

Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims, and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder-coated heavy-gauge steel and is manufactured, assembled, and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use. Wheel Capacity: - Maximum wheel size: Up to 29" + with or without tire - Maximum hub width: 200 mm (7.87") - Maximum rim width: 102 mm (4") - Hub compatibility: Accommodates quick release and solid axle hubs, also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors Mounting Options: - Bolt to benchtop — mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center - Clamp in vise — base is 76 mm (3") deep - Install in TSB-2.2 Truing Stand Base

- Go longer than ever with solar charging that gives you unlimited battery life in smartwatch mode (assuming all-day wear with 3 hours per day outside in 50,000 lux conditions) - Rugged GPS smartwatch is water-rated to 100 meters and thermal- and shock resistant with fiber-reinforced polymer case and scratch-resistant Corning Gorilla glass - Built-in sports apps to take on running, biking, swimming, strength training and more; plus, VO2 Max and other training features - Live the ultimate connected life with smart notifications and Connect IQ compatibility when paired with your compatible smartphone. - Track your adventures with the built-in 3-axis compass and barometric altimeter, plus multiple global navigation satellite systems (GPS, GLONASS and Galileo) - Understand your body better with all-day health monitoring features that track your heart rate, sleep, Pulse

- Compact, lightweight satellite communicator enables two-way messaging and interactive SOS globally (Active satellite subscription required. Some jurisdictions regulate or prohibit the use of satellite communication devices.) - Navigate back to where you started by using TracBack routing - Share your location with loved ones back home at any time (active satellite subscription required) by using your MapShare page or with your coordinates embedded in your messages - Get accurate heading information using the digital compass—even when you're not moving - Sync with the Garmin Explore app and website on your compatible smartphone for trip planning and topographical mapping, and create waypoints, courses, activities and collections you can sync to your device

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.

Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.